InFocus IN5100 manual Network Information, Description

Page 6

Network Information

Network Information

NOTE: All screen images shown in this document are screens of a logon using an Administrator’s ID. Any Adminis- trator-only functions will not be displayed when using a User ID.

Displays the projector’s current network configuration.

Item	Description


DHCP	Displays the DHCP configuration settings.

IP Address	Displays the current IP address.

Subnet Mask	Displays the Subnet Mask.

Default Gateway	Displays the Default Gateway.

MAC Address	Displays the MAC Address.

Firmware Date	Displays the network firmware time stamp (Admin ID only).

Firmwave Version	Displays the network firmware version number (Admin ID only).

6

Image 6

Contents TABLE OF CONTENTS IN5100 Series Networking GuideIf using a network with DHCP enabled Before using the network functionsConfiguring and Controlling the Projector via a Web Browser Network FunctionsDescription Configuring and controlling the projector via a web browserAdministrator ID User IDPassword Settings Network Information Network Setting Network Restart on the main menuMail Settings email under Alert SettingsAlert Settings Schedule Settings Date/Time Settings Security Settings Basic projector commands including power on/off and changing source Projector ControlMain Picture Settings Picture settings including keystone, contrast, and brightnessProjector Status Network Restart Failure and Warning Alerts via E-mailRestart Subject line Test Mail Projector name Text Send Test Mail SNMP Settings Projector management via SNMPSchedule settings Controlling the projector via schedulingThere are three types of scheduling