InFocus IN5100 manual Projector management via SNMP, SNMP Settings

Page 17

Projector management via SNMP

NOTE:

•It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP Settings

Configure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

6Enter [http://192.168.1.10] into the address bar of the web browser.

7Enter the Administrator ID and Password and click [Logon].

8Click [Security Settings] on the main menu.

9Click [SNMP] and set the Community Name on the screen that is displayed.

Click the [Apply] button to save the settings.

NOTE:

•A Network Restart is required after the Community Name has been changed.

•Click [Network Restart] and configure the items.

•Make sure SNMP sysLocation and SNMP sysContact in the Network Settings page are defined.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents IN5100 Series Networking Guide TABLE OF CONTENTSConfiguring and Controlling the Projector via a Web Browser Before using the network functionsIf using a network with DHCP enabled Network FunctionsAdministrator ID Configuring and controlling the projector via a web browserDescription User IDPassword Settings Network Information Network Restart on the main menu Network Settingemail under Alert Settings Mail SettingsAlert Settings Schedule Settings Date/Time Settings Security Settings Main Picture Settings Projector ControlBasic projector commands including power on/off and changing source Picture settings including keystone, contrast, and brightnessProjector Status Restart Network RestartFailure and Warning Alerts via E-mail Subject line Test Mail Projector name Text Send Test Mail Projector management via SNMP SNMP SettingsThere are three types of scheduling Schedule settingsControlling the projector via scheduling
Top Page Image Contents