InFocus IN5100 manual Settings

Page 5

Settings

Settings

Refer to the following for configuring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1Enter [http://192.168.1.10] into the address bar of the web browser and the screen below will be displayed.

2Enter your ID and password and click [Logon].

If the logon is successful this screen will be displayed (if logged on as an Admin).

3Click the desired operation or configuration item on the main menu located on the left-hand side of the screen.

5

Image 5

Contents IN5100 Series Networking Guide TABLE OF CONTENTSConfiguring and Controlling the Projector via a Web Browser Before using the network functionsIf using a network with DHCP enabled Network FunctionsAdministrator ID Configuring and controlling the projector via a web browserDescription User IDPassword Settings Network Information Network Restart on the main menu Network Settingemail under Alert Settings Mail SettingsAlert Settings Schedule Settings Date/Time Settings Security Settings Main Picture Settings Projector ControlBasic projector commands including power on/off and changing source Picture settings including keystone, contrast, and brightnessProjector Status Restart Network RestartFailure and Warning Alerts via E-mail Subject line Test Mail Projector name Text Send Test Mail Projector management via SNMP SNMP SettingsThere are three types of scheduling Schedule settingsControlling the projector via scheduling