InFocus IN5100 Network Restart, Failure and Warning Alerts via E-mail, Mail Settings, Description

Page 15
Network Restart

Network Restart

Item

Restart

NOTE:

Description

Restarts the projector’s network connection to activate new configuration settings.

Restarting requires you to re-log on to control or configure the projector.

Failure and Warning Alerts via E-mail

The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error.

NOTE:

Up to five e-mail addresses can be specified.

The projector may be not able to send e-mail if the projector suddenly loses power.

Mail Settings

NOTE:

A Network Restart is required after the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items.

1Click [Mail Settings] and configure each item. Refer to the [Mail Settings] item in [Configuring and Controlling the Projector via a Web Browser] for further information.

2Click the [Apply] button to save the settings.

NOTE:

Click the [Send Test Mail] button in [Mail Settings] to confirm that the e-mail settings are correct. The following mail will be delivered to the specified addresses.

15

Image 15
Contents IN5100 Series Networking Guide TABLE OF CONTENTSNetwork Functions Before using the network functionsConfiguring and Controlling the Projector via a Web Browser If using a network with DHCP enabledUser ID Configuring and controlling the projector via a web browserAdministrator ID DescriptionPassword Settings Network Information Network Restart on the main menu Network Settingemail under Alert Settings Mail SettingsAlert Settings Schedule Settings Date/Time Settings Security Settings Picture settings including keystone, contrast, and brightness Projector ControlMain Picture Settings Basic projector commands including power on/off and changing sourceProjector Status Network Restart Failure and Warning Alerts via E-mailRestart Subject line Test Mail Projector name Text Send Test Mail Projector management via SNMP SNMP SettingsSchedule settings Controlling the projector via schedulingThere are three types of scheduling