Onkyo C-705TX instruction manual Capacity is Watts, Cable

Connections

ANALOG

OUTPUT

L AC OUTLET

					UNSWITCHED	50Hz	To wall outlet
					AC 230-240V
Audio	R				100W MAX.
		REMOTE	DIGITAL OUTPUT
connection		CONTROL
			1	2
				OPTICAL	"CLASS 1 LASER
cable
					PRODUCT"

1		3
	cable	2
L R
CD	connector	DIGITAL IN	Optional Optical
Amplifier without		MD recorder, CD recorder,
			fiber cable
digital input terminal		DAT deck, etc.

1Connection with the Amplifier

Connect the ANALOG OUTPUT connectors on the rear panel of C-705TX and the amplifier’s CD input connectors using the audio connection cable. Refer to the amplifier’s instruction manual for connections.

2Connection to DIGITAL OUTPUT connector

Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD-R, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1 or 2 connector using the optical cable (option). These connectors can also be used for connecting an amplifier which is equipped with a digital input connector.

A connector protection cap is attached to the digital output connector. Re- move this cap to connect the unit to other digital equipment. When you are not using the digital output connector, replace this cap.

Before Using

Connections

Operations

3AC OUTLET (UNSWITCHED)

The AC power cord of another compo- nent can be connected to this AC OUT- LET connector.

This means that if the C-705TX is plugged into an AC outlet, AC power is available to this AC OUTLET even if the C-705TX is off.

The shape and capacity of the AC outlet may differ depending on the area of pur- chase. Make sure that the capacity of other components connected to this unit does not exceed the capacity that is printed on the rear panel.

ANALOG

OUTPUT

L				AC OUTLET
				AC 230-240V 50Hz
				UNSWITCHED
	REMOTE			100W MAX.
R		DIGITAL OUTPUT
	CONTROL
			OPTICAL
		1	2	"CLASS 1 LASER

PRODUCT"

230-240 V, 50 Hz models	120 V, 60 Hz models
Capacity is	Capacity is
100 watts.	120 watts.

Other Information

11