Connections
Connecting to Onkyo Separate Collection series components
This section introduces you to the other Separate Collection Series system components and their con- venient system functions, followed by instruction on how to connect the system.
The following Separate Collection Series components are available:
•
•
•
•
•
•
Note that the available components may vary according to the area.
Combining the
•Auto Power On
–You can turn on the power to the amplifier by pressing the STANDBY/ON button on one of the system components. (The amplifier’s POWER switch must be set to ON.)
–When the amplifier's POWER switch is set to ON, you can turn on the power to all the system components simultaneously by pressing the STANDBY/ON button on the amplifier.
Afterwards, you can turn off the power to the individual components that are not in use.
Note: If an
•Direct Change
Press the following button on the component you want to operate. The amplifier will automatically select the input from the corresponding component:
–The play button on the CD player, MD recorder, or stereo cassette tape deck; or
–The PRESET Ã/¨ buttons on the tuner.
•Remote Control Operation
You can operate all the system components using the remote controller supplied with the amplifier
•Program Timer
You can operate the timer playback and recording functions using the
•Sleep Timer
You can fall asleep to a music/radio program using the timer. (Refer to the
•CD Dubbing
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possible with the pressing of a single button. (Refer to the
•CD/MD/CDR Synchro Recording
When using a stereo cassette tape deck, MD recorder or CD recorder to record from the CD player, you can record with simply starting on a CD player. (Refer to the
•Dubbing a specific track from CD
You can specify a track on a CD and easily dub it to a connected MD recorder or CD recorder. (Refer
8 | to the |
|