
Printer setup
If you only purchased a base printer with no options, follow the directions under “Positioning the printer” on page 13.
Note: Be sure to set up the items in the order listed in the table.
Use the following table to locate the instructions you need to set up your printer and any paper handling options you may have purchased.
Installing a 2000-sheet drawer
Topic | Go to page... | |
|
| |
Installing a | 11 | |
|
| |
Installing a | 12 | |
|
| |
Installing a duplex unit | 13 | |
|
| |
Positioning the printer | 13 | |
|
| |
Installing an output expander | 14 | |
|
| |
Installing a | 15 | |
|
|
Your printer supports one optional
Warning: If you have an optional duplex unit and a
Note: You will install the power cord for the
1Unpack the
2Place the drawer in the location you have chosen for your printer.
3If you are installing a
a Place the two stabilizing bars on the ground, narrow side up.
b Lower the
c Screw the bars into place using four screws (two screws for each bar).
4Adjust the four leveling feet on the bottom of the drawer, if necessary.
5Continue with “Installing a
Leveling feet
Set up the printer and paper handling options
11