b
a 
c
Warning: Do not touch the image transfer unit belt with your fingers.
3Remove the print cartridges. For each cartridge: a Pull up on the handhold.
b Pull the cartridge straight out and use the handle to lift it off the guides. c Set the cartridge on a firm, flat, clean surface in the upright position.
4Remove the packing material from the image transfer unit belt:
a Grasp the detensioner located on the right side on the inside of the machine.
b Gently but firmly pull up on the detensioner and the attached sheet, then remove both items from the printer.
Detensioner
2
1
1
5Reinstall the print cartridges. For each cartridge:
b | a Turn the cartridge over so the handle is on the bottom. |
bRemove the red plastic packing material from the photoconductor drum. Discard the packing material.
a 
Set up the print supplies
17