IBM Partner Pavilion 1454, 1464 setup guide Card Function

Page 24

Installing an option card Your printer has one expansion card slot that supports a number of option cards. The following table describes their function.

	Card	Function
	Card	Function

	MarkNet internal print server	Adds an Ethernet or Token-Ring port so you can connect your printer to a network.

	Parallel 1284-B Interface Card	Adds a parallel port.

	Serial Interface Card	Adds a serial port.

Note: The network version of this printer ships with an Ethernet print server already installed.

Warning: Option cards are easily damaged by static electricity. Touch something metal on the printer before you touch an option card.

You need a small Phillips screwdriver to install these options.

1Remove the system board access cover (see page 20).

2Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.

Save the screw.

3Unpack the option card. Save the packing materials.

4Align the connector on the option card with the connector on the system board.

The cable connectors on the side of the option card must fit through the connector slot.

5Push the option card firmly into the option card connector.

6Secure the card to the system board with the screw.

Connectors

Install memory, firmware, or option cards

24

Image 24

Contents Setup Guide Page Setup Guide Conventions Static sensitivity notice Contents Other sources of information Choose your setup local or network printer Install drivers for local printingLocal printer Network printer WindowsDouble-clickPrint Center or Printer Setup Utility MacintoshClick Printer and Software Setting up a multifunction printer Unpacking Unpack the printerUNIX/Linux Set up the printer and paper handling options Printer modelsPrinter setup Installing a 2000-sheet drawerInstalling a 500-sheet drawer Installing a duplex unit Positioning the printer Installing an output expander Installing a 5-bin mailbox Set up the print supplies Setting up the print cartridgesDetensioner Set up the print supplies Install memory, firmware, or option cards Attaching an operator panel overlayRemoving the system board access cover Installing a memory card What do I do now?Installing a firmware card Installing a hard disk You touch a diskCard Function Replacing the system board access cover Applying the Option Added labelLoad paper Loading the 500-sheet traysLoading the 2000-sheet tray LT.LG Loading the multipurpose feeder Attach cables and power cord Cable typesAttaching cables Verify printer setup Printing a menu settingsPrinting a network setup Printing Help Menu pages Click Help Menu PagesConfigure for TCP/IP Assigning a printer IP address Verifying the IP settingsConfiguring for Pull Printing Install drivers for network printing DirectShared Click Install Software Click Printer and Software Click Add PortInstall the printer driver or subset on network clients Click Start à Settings à PrintersClick Network Print Server Mac OS X version 10.1.2 and later Viewing and using the publications CD Other sources of informationUNIX/Linux NetWare Congratulations Page Readers’ Comments We’d Like to Hear from You Business Reply Mail Page Part Number 75P6542