IBM Partner Pavilion 1454, 1464 setup guide Installing a firmware card

Page 22

Installing a firmware card

Note: Firmware and flash memory cards offered for other printers cannot be used with your printer.

Warning: Firmware and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.

Follow the instructions in this section to install an optional firmware or flash memory card.

Only one of each type of card is supported.

1Remove the system board access cover (see page 20).

2Unpack the card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

3Holding the card by its sides, align the pins on the card with the holes on the system board.

4Push the card firmly into place.

The entire length of the connector on the card must touch the system board. Be careful not to damage the card connectors.

Pins

What do I do now?

	Task	Go to page…
	Task	Go to page…

	Installing a hard disk	23

	Installing an option card	24

	Replacing the system board access cover	25

Install memory, firmware, or option cards

22

Image 22

Contents Setup Guide Page Setup Guide Conventions Static sensitivity notice Contents Other sources of information Local printer Network printer Choose your setup local or network printerInstall drivers for local printing WindowsMacintosh Double-clickPrint Center or Printer Setup UtilityClick Printer and Software Unpack the printer Setting up a multifunction printer UnpackingUNIX/Linux Set up the printer and paper handling options Printer modelsPrinter setup Installing a 2000-sheet drawerInstalling a 500-sheet drawer Installing a duplex unit Positioning the printer Installing an output expander Installing a 5-bin mailbox Set up the print supplies Setting up the print cartridgesDetensioner Set up the print supplies Install memory, firmware, or option cards Attaching an operator panel overlayRemoving the system board access cover Installing a memory card What do I do now?Installing a firmware card Installing a hard disk You touch a diskCard Function Replacing the system board access cover Applying the Option Added labelLoad paper Loading the 500-sheet traysLoading the 2000-sheet tray LT.LG Loading the multipurpose feeder Cable types Attach cables and power cordAttaching cables Verify printer setup Printing a menu settingsPrinting a network setup Printing Help Menu pages Click Help Menu PagesAssigning a printer IP address Verifying the IP settings Configure for TCP/IPConfiguring for Pull Printing Direct Install drivers for network printingShared Click Install Software Click Printer and Software Click Add PortClick Start à Settings à Printers Install the printer driver or subset on network clientsClick Network Print Server Mac OS X version 10.1.2 and later Other sources of information Viewing and using the publications CDUNIX/Linux NetWare Congratulations Page Readers’ Comments We’d Like to Hear from You Business Reply Mail Page Part Number 75P6542