Marantz VP-15S1 Initial Setting, Turning on the Power, Zooming and Focusing, Detail Focusing

INITIAL SETTING

Turning on the Power

1.Connect the supplied AC power cord. (☞ P.9)

2.Press the ON button on the remote controller or the / I button on the projector. The ON indicator lights up.

STANDBY ON

IRIS LAMP C.TEMP GAMMA

COMP.1 COMP.2 S-VIDEO USER

C1 C2 S G1

HDMI 1 HDMI 2 VIDEO

H1 H2 V G2

AUX 1 AUX 2

A1 A2 RGB G3

THTR STD DYN G4

Zooming and Focusing

Project an image on the screen roughly at first.

1.Turn the Zoom ring and adjust to the desired size within the zoom range.

WIDE: Enlarges (zooms in) the projected image.

TELE: Reduces (zooms out) the projected image.

2.Turn the Focus ring until the image on the screen

becomes clear.

WIDE

1.

2.

TELE

Detail Focusing

You can strictly focus the image with focus pattern.

1.Press the PATTERN button to project the focus pattern on the screen.

V-MUTE		MENU
		M
	ENTER		INPUT
A		I
ASPECT		INFO.
CINEMA	VCR MODE	BLACK LEVEL	PATTERN
		BLACK
FULL	NOR	ZOOM	THRU

2.Turn the Focus ring to make an adjustment.

Adjust the focus for the sharpest image possible to obtain, using focus pattern.

3.Press the PATTERN button again to hide the focus pattern. This completes fine focusing.

Note :

Focus Pattern Color by Lens Shift Position (☞ P.16)

The focus pattern changes color depending on the lens position. There are two colors and they can be used for checking the quality of the projected image. The white focus pattern uses the highest optical performance to maximize the sharpness of the projected image. To enjoy the highest sharpness, it is recommended to position the lens within this range.

When the lens is shifted outside the aforementioned range, the focus pattern turns green. Rough focusing in this range looses image sharpness.

Adjusting the zoom position from WIDE to TELE enhances sharpness even at the same lens position.

ENGLISH

11