Setting

1. Use the M/N keys to select an item.

OPERATIONS

– 2-3 P/D

Select either auto or off from the 2-3 P/D system.

– COMPONENT

2. Use the O/P keys to change the setting

SETTING�	�
ASPECT		SQUEEZE�
TRIG.2		ON	OFF�
LANGUAGE		ENGLISH�
CEILING		YES	NO�
REAR		YES	NO�
COMPONENT		AUTO�
2-3 P/D		AUTO	OFF�
RESET LAMP		YES	NO�
RESET ALL		YES	NO

3.Press the ENTER key to restore.

NFor video input signals, the following settings can be made:

L ASPECT

L TRIG.2 OUT L LANGUAGE L CEILING L REAR

L COMPONENT (AUTO, NTSC, 480p, 720p, 1080i) L 2-3 P/D (AUTO, OFF)

L RESET LAMP L RESET ALL

– TRIG.2 OUT

Select 12 V DC from on and off at each aspect discretely.

ASPECT	ON	OFF

FULL	12 V DC	0 V

SQUEEZE	12 V DC	0 V

4:3	12 V DC	0 V

ZOOM	12 V DC	0 V

– LANGUAGE

Select the language used in the on-screen menu.

The available languages are English, French, and Spanish.

When set to AUTO, a video system is automatically selected as either NTSC, 480p, 720p, or 1080i. When AUTO does not work out, select an appropriate system from either NTSC, 480p, 720p, or 1080i.

– ALL RESET

When the user selects “YES”, the following message appears:

SETTING �

RESET ALL？�

YES NO

Again, select “YES”, and press the ENTER key. Then restore the factory default settings except for the lamp life and RGB ADJUST MEMORY.

– RESET LAMP

When the user selects “YES”, the following message appears:

SETTING �

RESET LAMP？�

YES NO

Again, select “YES”, and press the ENTER key. Then the lamp life is initialized.

ENGLISH