Lamp Life and Replace Lamp
ENGLISH | LAMP LIFE |
|
|
|
| |
|
|
|
|
| ||
| The user can display the remaining lamp life at any time by | |||||
| pressing the OSD key on the remote controller. LAMP LIFE is | |||||
| displayed at the very bottom of the menu. | |||||
|
|
|
|
|
|
|
|
| VIDEO | INPUT | � | :COMPONENT� |
|
| ||||||
|
| VIDEO | SETTING |
| :NORMAL STD� |
|
|
|
| :AUTO� |
| ||
|
| NOISE | REDUCTION | :OFF� |
| |
|
| WHITE | ENHANCER | :OFF� |
| |
|
| ASPECT |
| :SQUEEZE� |
| |
|
| TRIG.2 OUT |
| :ON� |
| |
|
| COMPONENT |
| :AUTO� |
| |
|
|
| :H=＋100� |
| ||
|
|
|
|
| :V=－50� |
|
|
| LAMP | LIFE |
| :1125HOURS |
|
|
|
|
|
|
|
|
Notes:
•When the LAMP LIFE becomes less than 1000 HOURS, it is recomended to replace the lamp unit. A lamp may be worn out when the LAMP LIFE becomes less than 1000 HOURS.
•The projector is designed not to turn on after the lamp use has exceeded 2000 hours. (LAMP LIFE 0 HOUR)
If the projector is in use, it will turn off.
PWhen the lamp life expires in about 100 hours and the unit is on, the remaining lamp life is diplayed on the screen.
��
�
WARM UP�
LAMP LIFE 100 HOURS
PWhen the lamp life expires in about 5 hours, the remaining lamp life is displayed on the screen at
��
�
WARNING�
LAMP LIFE 5 HOURS
To clear the menu above, press the MENU key.
PWhen the lamp life has expired (LAMP LIFE 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will blink in orange.
��
�
WARNING�
LAMP LIFE 0 HOUR
Use the following procedure to reset (initialize) the lamp life indicator after replacing the lamp with a new one.
1.Unplug the power cord.
2.Wait about one minute and reconnect the power cord.
3.Press the POWER key. Only the POWER key will be of effect. The following message appears for 120 seconds.
��
�
REPLACE LAMP！�
RESET LAMP LIFE YES NO
4.Select “YES”, using the O/P keys.
5.Press the ENTER key. The lamp life indicator is now initialized.
15