ENGLISH
INTRODUCTION
PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW
Front and Top
!3 !2 o !0 y
VP8100 |
t !3 | w t |
POWER
MENU |
DBY |
STAN |
ING |
WARN |
INPUT |
ENTER |
U
LR
D
A TEXAS INSTRUMENTS TECHNOLOGY
w e r q u i !3!1
qIR sensor (one for each front and rear)
wLens
eFocus ring
Adjust the picture focus.
rZoom ring
Adjust the size of the projected image.
!1The M/N/O/P keys
Control the menu cursor.
Press the M key for more than three seconds to turn the HIGH BRIGHT mode on.
Press the N key to turn the HIGH BRIGHT mode off.
Note:
The HIGH BRIGHT mode is available for only the RGB or the DYNAMIC picture mode for a video signal input.
tAdjusters
Adjust the vertical angle of the projector.
yConnector panel
uPOWER key
Press to turn the projector on and off. The POWER key lights up in green when the power is turned on.
iMENU key
Press to display the
oENTER key
Press to enter items in the menu when the menu is displayed on screen.
!0INPUT SELECT key
Select an input signal. Each time the key is pressed, the unit toggles between COMPONENT,
!2Indicators: STANDBY/WARING
Turn green when the projector is connected to AC power. It lights up or flashes orange under the following conditions:
•Lights up orange when temperature inside the projector becomes unusually high.
•Flashes orange when the following errors occur in the projector:
–when the lamp cover is not secured firmly,
–when the fan inside the projector stops,
–when the lamp has failed or the lamp is almost completely
!3Ventilation holes
Notes:
•Do not place anything near the ventilation holes as it may cause internal heat
•Do not place your hand or objects near the ventilation holes; the air coming out is hot.
3