CD Player

MS4000 EN 3/5/03 8:46 AM Page 11

Skipping a Disk

Press DISC SKIP.

Searching Through a CD

Press and hold SKIP BACKWARD		/ SKIP
FORWARD	to search through a CD while it is
playing.

Tip: While playing a CD, press and hold SKIP- FORWARD or BACKWARD for more than 2 seconds to search through the CD.

Setting Up a CD Program

You can program the CD player to play up to any 32 tracks on the CDs in the tray.

1.While the CD player is stopped, press PROG•SET to enter program mode.

The system displays the next available program number: “- - P:01,” with “- -” flashing, prompts you for the first track in the program list.


2. Press SKIP BACKWARD		/ SKIP
FORWARD	to select a track (press DISC SKIP to

select a track from a different disc).

Mixing the Play Order

Press /PTY to turn on/off the playing of tracks in random order. (Remote Only)

Sampling Tracks

Press INTRO to play the first 10 seconds of each track on the current disc, all discs in the tray, or turn INTRO mode off. (Remote Only)

Repeat

Press REPEAT to repeat the current track, current disc, all discs, or turn REPEAT mode off. (Remote Only)

Note: You may also press REPEAT to select 1 disc or all discs before activating INTRO & MIX functions

5P:01

3.Immediately press PROG•SET to assign the select- ed track to the program number. After 3 seconds, you are prompted for the next track in the program list.(In CD program mode, PROG icon will be lit.)

Playing a Program List

While in PROGRAM mode, press PLAY/PAUSE .

Displaying the Program List

1.While the CD player is stopped, press PROG•SET to enter PROGRAM mode.

2.Press PROG•SET repeatedly to list each track assignment in the program list.

Deleting Program List

While in program mode, press and hold STOP for 3 seconds. The system displays the message CLEAR.

Tips:

• You can create a program of up to 32 tracks.

Caution: Do not push to force closing of the tray during CD playback or tray opening.