MS4000 EN 3/5/03 8:46 AM Page 14
Troubleshooting Tips
EN
Problem | Solution |
System will | • Check power cord for a secure |
not turn on | connection. |
| • Unplug the unit for a moment, and |
| then plug into power source again. |
| • Check the outlet by plugging in |
| another device. |
No sound • Increase the volume setting.
•Check connection to speakers.
•Check that you have selected the appropriate function: CD, TAPE, Tuner.
•Make sure mute is off.
•Make sure headphones are not plugged in.
Poor radio • Check antenna connection. reception • Move antenna.
•Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave, fluorescent lights.
CD does • Check that CD is in the tray.
not play • Check that CD label is facing up.
•Check that PAUSE mode is not on.
•Check that CD function is selected.
•Use CD lens cleaner.
•Clean the disc.
•Try another CD.
CD sound • Clean the disc.
skips • Check disc for warping, scratches, or other damage.
•Check if something is causing the system to vibrate. If so, move the system.
•Make sure the speakers are at least 3 feet away or on a different surface from the main unit.
Problem | Solution |
CD button | • Switch to another function (TAPE, |
will not | Tuner) and then back to CD. |
respond, or |
|
does not |
|
change |
|
discs when |
|
you press |
|
DISC SKIP |
|
Distorted or | • Inspect the tape heads, clean it if |
noisy tape | necessary. |
recordings |
|
Remote | • Check that the batteries are properly |
control | installed. |
does not | • Replace weak batteries. |
work | • Check the system is plugged into |
| power source. |
| • Point the remote directly at the |
| system’s front panel. |
| • Move closer to the system. |
| • Remove any obstacles between the |
| remote and the system. |
|
|
10