JVC TM-H1750CG operating instructions Troubleshooting, Following are not malfunctions

1-10		TROUBLESHOOTING
	Solutions to common problems related to your monitor are described here. If none of the solutions presented here
	solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance.
		Problems	Points to be checked	Measures (Remedy)
	No power supply.		Is the power plug loosened or disconnected?	Firmly insert the power plug.
			Is the main power turned OFF?	Turn the main power ON. (See page 6.)
	No picture with the		Is the video signal output from the connected	Set the connected component correctly.
	power on.		component?
			Is the input signal selected properly?	Select the required video signal input with the
				Input select button. (See page 9.)
			Is the video cable disconnected?	Connect the video signal cable firmly.
				(See pages 15 and 16.)
	No sound.		Is the audio signal output from the connected	Set the connected component correctly.
			component?
			Is the volume output set to minimum?	Adjust the speaker volume with the VOLUME/
				SELECT button. (See page 9.)
			Is the audio cable disconnected?	Connect the audio signal cable firmly.
				(See pags 15 and 16.)
	Shaking picture.		Is the monitor close to a device generating a	Move the device away from the monitor until the
			strong magnetic field?	picture stabilizes.
	No colors, wrong		Is the color system selected properly?	Set COLOR SYSTEM in the <MENU> screen to
	color, or dark picture.			AUTO. (See page 11.)
			Has the picture control setting (CONTRAST,	Set each picture control to the standard setting.
			BRIGHT, CHROMA or PHASE) been changed?	(See page 9.)
				Press the COLOR OFF button and BLUE CHECK
				button to adjust. (See page 10.)
No.
	Unnatural, irregularly		Is the monitor close to a speaker, magnet or any	Move the device away from the monitor and turn
	colored, or distorted		other device generating a strong magnetic field?	the monitor’s power off. Wait at least 30 minutes,
51923	picture.			then turn the power on again.
	Dark stripes appear		Is the aspect ratio set to 16:9?	Switch the aspect ratio to 4:3 with the ASPECT
	at the top and bottom			button on the front panel.
	of the screen, picture
	vertically squeezed.
	The overall picture		Has the UNDER SCAN button been pressed so	Press the UNDER SCAN button to turn off the
	size is too small.		the UNDER SCAN button lights?	button. (See page 4.)
	Function buttons on		Has control of the buttons been locked? (Has	Set CONTROL LOCK in the <SET-UP MENU>
	the front panel do not		the CONTROL LOCK function been set to ON?)	screen to OFF. (See pages 12 and 13.)
	function.
	The INPUT SELECT		Is input selection under external control? (Has	Set REMOTE SYSTEM in the <SET-UP MENU>
	buttons do not		the REMOTE ENABLE function been set to	screen to TRG. (See pages 12 and 13.)
	function.		valid?)	Set REMOTE ENABLE to OFF (invalid).
				(See page 17.)

The following are not malfunctions:

● When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to t	he
structure of the cathode ray tube and will be deleted when another image is displayed.

●You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful.

●The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well.

●If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being used.

TM-H1750CG

18