JVC TM-H1750CG Display and Selections in the SET-UP Menu Mode Setting, Purpose Settings, Screen

4): Indicates the

HOW TO USE THE MENU FUNCTIONS (cont’d)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

Set-up menu items		Purpose				Settings
PICTURE SUB ADJ.	Image sub adjustment			Selects CONTRAST/BRIGHT/CHROMA/PHASE. The
					selected setting screen is shown. Select the function display for
					adjustment.
			+				+	+

No.51923

You can set the following set-up menu items.

• PICTURE SUB ADJ.	• WHITE BALANCE	• REMOTE SYSTEM
• H. POSITION	• CONTROL LOCK	• INPUT REMOTE
• V. POSITION	• STATUS DISPLAY

Notes:

●Parameters for H. POSITION and V. POSITION can be set separately depending on

the signal (Input A (VIDEO), Input B (VIDEO), Input C or Input D) selected with the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

●WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value.

Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

●INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA	MENU	The <SET-UP MENU> screen is displayed.
		* The on-screen display goes off automatically after about five
PHASE		minutes with operation performed.

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item.

<SET-UP MENU> screen

1<SET-UP MENU>

‰PICTURE SUB ADJ.

	H. POSITION		:	00
	V. POSITION		:	00
	WHITE BALANCE
	CONTROL LOCK		: OFF
	STATUS DISPLAY		: ON
	REMOTE SYSTEM		: MAKE
	INPUT REMOTE		: A – D	3
2
			EXIT	4
CHROMA	CONTRAST	VOLUME/SELECT		MENU
PHASE	BRIGHT

<Front panel buttons>

1 Selection mark ( menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

current settings (value).

4 Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

CONTRAST

Adjusts contrast.

–10

–9

••

–01

00

01

••

09

10

BRIGHT

Adjusts brightness.

–10

–9

••

–01

00

+01

••

+09

+10

CHROMA

Adjusts color density.

*1

–10

–9 •• –01

00

+01

••

+09

+10

+

PHASE

Adjusts hue.

*1

–10

–9

••

–01

00

+01

••

09

+

10

H. POSITION

Adjusts the horizontal position of the

screen (+: Horizontal position shifts

–5

•••

–01

00

+1

•••

+5

to the right/-: Horizontal position shifts to

the left)

V. POSITION

Adjusts the vertical position of the screen

–5

•••

–01

00

+1

•••

+5

(+: Vertical position moves up/-: Vertical

position moves down)

WHITE BALANCE

Adjusts the white balance.

Selects the drive (DRV) or cut off (CUTO) adjustment. The selected

setting screen is shown. Select the function display for adjustment.

DRIVE

R. DRIVE

Adjusts red level.

–20

–1

9

••

–01

00

+01

••

+19

+20

B. DRIVE

Adjusts blue level.

–20

–1

9

••

–01

00

+01

••

+19

+20

CUT OFF

R.

CUT OFF

Adjusts red cut off.

–20

–1

9

••

–01

00

+01

••

+19

+20

G. CUT OFF

Adjusts green cut off.

–20

–1

9

••

–01

00

+01

••

+19

+20

B. CUT OFF

Adjusts blue cut off.

–20

–1

9

••

–01

00

+01

••

+19

+20

CONTROL LOCK

Sets the operation buttons on the front

OFF

ON

panel to control lock mode.

STATUS DISPLAY

Sets the status display of the color system.

OFF

ON

REMOTE SYSTEM

Sets the external control function method.

MAKE

TRG .

*2

INPUT REMOTE

Sets external control of input selection.

A –D

A/B

(Shown only when REMOTE SYSTEM is

*2

set to MAKE.)

*1 May not be shown depending on the type of signals input.

*2 Refer to HOW TO USE EXTERNAL CONTROL on page 17 for more details.

Notes:

ENGLISH

CHROMA	CONTRAST
PHASE	BRIGHT

PICTURE SUB ADJ.

H.POSITION V. POSITION

WHITE BALANCE

CONTROL LOCK

STATUS DISPLAY

REMOTE SYSTEM

INPUT REMOTE

A selection mark (	4) is put next to the selected item.
Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (	4)
PHASE
CONTRAST/		Reverse selection mark (	4)
BRIGHT

Function	Contents
displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exit the <MENU>
	screen.
DRV	Selects DRIVE adjustment.

4.To set the other set-up menu items, repeat the procedures 2 and 3.

5.Press the MENU button to quit.

MENU	Front panel	Function	Contents
	button	displayed
	MENU	EXIT	Quit (or Release) the <MENU>
			screen

● When the CONTROL LOCK function is

set to ON, pressing operation buttons

on the front panel will display the

message “CONTROL LOCK ON!” on

the screen for about 3 seconds.

● The CONTROL LOCK function is

maintained even when the power is

turned off.

● To turn off the CONTROL LOCK

function, while holding the MENU button

press the CHROMA/PHASE button.

Then set the CONTROL LOCK function

to OFF.

● Even when the CONTROL LOCK

function is set to ON, the following

operations are available:

– Power Switch operation

– Volume control with the VOLUME/

SELECT buttons

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT	Front panel	Function		Contents
	button	displayed
	VOLUME/	+		Increase (to max. value)
		4		Forward the setting value
	SELECT (+)
		CUTO	Selects CUT OFF setting screen
	VOLUME/	–		Decrease (to min. value)
		1		Reverse the setting value
	SELECT (–)
		DRV	Selects DRIVE setting screen

Notes:

●For WHITE BALANCE items, select the CUT OFF or DRIVE

setting screen, then select the function display for adjustment.

●Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

CUTO	Selects CUT OFF
	adjustment.
RB	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

Note:
Setting	Description
MAKE	Make contact system: Controls the function with H and L (short-
	circuits or opens 15th terminal (GND)).
TRG.	Trigger system: Controls the function by short-circuiting (short-
	circuits or opens 15th terminal (GND)) with pulse (about 1 sec.)
A-D	Switches the input by short-circuiting a specified signal line in
	INPUT A, B, C, or D.
A/B	Switches between INPUT A and INPUT B with D-sub pin 2.

(Also, refer to HOW TO USE EXTERNAL CONTROL on page 17.)

– Display or disappear of the <SET-UP

MENU> screen.

● The STATUS DISPLAY function can be

set to display (ON) or not display (OFF)

the present color system when the

power is turned on or the input signal is

changed. Refer to page 9 for more

information.

● When REMOTE SYSTEM is set to

MAKE and any one of the INPUT A to D

buttons, the UNDER SCAN button,

COLOR OFF button or the ASPECT

button is pressed, “REMOTE ON!”

appears on screen for about 3 seconds.

(Not shown with CONTROL LOCK set

to ON.)

● When REMOTE SYSTEM is set to

TRG, the front panel controls can be

operated.

● INPUT REMOTE and REMOTE

SYSTEM are enabled when REMOTE

ENABLE is set to ON.

TM-

12

1-7

13

H1750CG