Video Attenuation, CBL/SAT, GAME, or AUX input

■The functions System On/Auto Power On and Direct Change don’t work for components connected via u

These functions don’t work when Zone 2 is turned 20 on.

■When performing “Audyssey 2EQ® Room Correction and Speaker Setup”, the measurement fails showing the message “Ambient noise is too high.”.

This can be caused by any malfunction in your	—
speaker unit. Check if the unit produces normal
sounds.

■The following settings can be made for the composite video inputs

You must use the buttons on the unit to make these set- tings.

1.While holding down the input selector button for the input source that you want to set, press SETUP.

2.Use e/rto change the setting.

3.Press the input selector button for the input source that you want to set when you’ve finished.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR,

CBL/SAT, GAME, or AUX input.

If you have a games console connected to the composite video input, and the picture isn’t very clear, you can attenuate the gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded cor- rectly.

Before disconnecting the power cord from the wall out- let, set the AV receiver to Standby.

Important Note Regarding Video Playback

The AV receiver can upconvert component video and composite video sources for display on a TV connected to the HDMI OUT. However, if the picture quality of the source is poor, upconversion may make the picture worse or disappear altogether.

In this case, try the following:

1 If the video source is connected to a component video input, connect your TV to the COMPO-

NENT VIDEO OUT.

If the video source is connected to a composite video input, connect your TV to the MONITOR OUT V.

2 On the main menu, select “1. Input/Output Assign”, and then select “2. HDMI Input”. Select the relevant input selector, and assign it to “- - - - -” (➔ 39).

3 On the main menu, select “1. Input/Output Assign”, and then select “3. Component Video Input” (➔ 40):

If the video source is connected to COMPONENT VIDEO IN 1, select the relevant input selector, and assign it to “IN1”.

If the video source is connected to COMPONENT VIDEO IN 2, select the relevant input selector, and assign it to “IN2”.

If the video source is connected to composite video input, select the relevant input selector, and assign it to “- - - - -”.

SR608 specifications

The Onkyo SR608 is a versatile 7.2-channel home theater receiver that has gained popularity among audio enthusiasts for its impressive combination of features and performance. Launched as part of Onkyo's highly regarded line of A/V receivers, the SR608 stands out for its robust build quality, advanced technology, and user-friendly design.

One of the key features of the Onkyo SR608 is its onboard support for high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats deliver a lossless audio experience, allowing users to enjoy movies and music with unparalleled clarity and detail. Additionally, the receiver is equipped with advanced decoding capabilities, ensuring that it can handle various audio formats from different sources seamlessly.

The SR608 is also noteworthy for its video processing capabilities. It supports video upscaling up to 1080p through its Faroudja DCDi Cinema technology, allowing users to enhance standard-definition content and make it look sharper on high-definition displays. The receiver features multiple HDMI inputs, enabling users to connect a range of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another significant characteristic of the Onkyo SR608 is its robust amplifier section, which delivers a powerful output of 100 watts per channel (into 8 ohms). This ensures that even the most demanding audio tracks can be reproduced with accuracy and depth, making it ideal for a home theater setup that aims to provide an immersive audio experience. The receiver also includes dual subwoofer outputs, allowing for flexible bass management and the ability to create a more dynamic low-frequency response.

For those who appreciate convenience and connectivity, the SR608 comes equipped with a front-panel USB port, providing access to digital music files. Wi-Fi and Bluetooth compatibility can be added through optional adapters, enabling users to stream audio wirelessly from their smartphones or tablets. The receiver is also equipped with Onkyo’s exclusive Audyssey 2EQ technology, which automatically analyzes the acoustics of a room and calibrates the receiver’s settings for optimal sound performance.

In summary, the Onkyo SR608 is a feature-rich A/V receiver that combines powerful audio performance with advanced video processing, making it a favorite among home theater enthusiasts. Its extensive connectivity options, coupled with user-friendly technology, ensure that it remains a strong choice for those looking to build or upgrade their home entertainment system.