Onkyo SR608 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 72

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo- nents. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichan- nel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

•2-channel linear PCM (32–192 kHz, 16/20/24 bit)

•Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

•Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

•The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

•The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

72

Page 71 Page 73
Image 72
Page 71 Page 73
Contents TX-SR608 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Using the Remote ControllerInstalling the Batteries Aiming the Remote ControllerContents Features AmplifierProcessing MiscellaneousTHX Select2 Plus Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesPower cord UREMOTE Control jackRear Panel CENTER, FRONT, SURR, Surr Back or Front High or Front WideRemote Controller Controlling the AV ReceiverReturn button Controlling the tunerAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting the Speaker Cables Speaker cables, and twist the bare wires tightly, as shownScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm North American and Taiwan models SurroundUsing Dipole Speakers Connecting a Powered SubwooferBi-amping the Front Speakers About AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Connecting External Components FrontHow to record the video Connecting Onkyo uComponents Connecting AntennaSystem On/Auto Power On Remote ControlSignal Selection Which Connections Should I Use?Video Connection Formats Audio Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Selecting the Language Used for the Onscreen Setup Menus Setting the Display BrightnessBasic Operations Playing the Connected ComponentMuting the AV Receiver Using the Home Menu Using the Sleep TimerSelecting Speaker Layout TV, MUSIC, GAME, and THXUsing Headphones Audyssey 2EQ Room Correction and Speaker SetupChanging the Input Display Using Audyssey 2EQ EnterError Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Using the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Connecting a Recording Component RecordingRecording Separate AV Sources AV RecordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes About Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes Resolution Audio DTS-HD MasterDSD *7 DTS 96/24 *8Listening Mode Description Input Speaker Source Layout Onkyo-Original DSP Listening Modes Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu MenuInput/Output Assign Monitor OutHdmi Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TV/CD, PortSpeaker Setup Speaker SettingsComponent Video Input Digital Audio InputSpeakers Type Speaker Terminal Assign Front High/Front Wide/Zone2SurrBack/Front High/Front Wide FrontEqualizer Settings Speaker DistanceLevel Calibration THX Audio Setup BGCAudio Adjust Multiplex/MonoDolby Source Setup Theater-DimensionalAudyssey DSX LFE LevelDynamic Volume Reference LevelIntelliVolume SyncName Edit Game Mode Wide Mode*1*2Picture Mode*1*2 Listening Mode Preset Hardware Setup Volume SetupOSD Setup MiscellaneousSirius Settings North American models Lock Setup Using the Audio SettingsTone Control Settings Audyssey Settings Speaker LevelsLate Night Music OptimizerAdjusting the Bass & Treble Setting the Incoming Digital Signal Fixed ModeAudio Selector Audio SelectorConnecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverControlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneOperating with the remote controller Muting ZoneConnecting an Onkyo Dock Controlling iPodModels sold are different depending on the region Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockControlling Your iPod RI DockWithout the RI Control With the RI ControlAvailable buttons Playlist e / rRepeat Display *7 Muting Album +Preprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components Entering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uRemote Mode BD/DVD TV/CDResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsMode first SetupButtons ON/STANDBY Input TV VOL q / w Guide SearchTroubleshooting Standby indicator flashes redCan’t turn on the AV receiver There’s no sound, or it’s very quietThere’s no sound with a certain signal format Can’t select the Pure Audio listening modeAbout DTS signals Only the front speakers produce soundRemote controller doesn’t work Beginning of audio received by an Hdmi in can’t be heardOn screen display does not appear There’s no pictureAV receiver’s remote controller doesn’t control your iPod Sound changes when I connect my headphonesThere’s no sound There’s no videoVideo Attoff default Video AttenuationCBL/SAT, GAME, or AUX input Important Note Regarding Video PlaybackSpecifications Amplifier Section GeneralVideo Section Tuner SectionAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection How to connect and setup Confirm the connecting and settingChange each item in the Hdmi Setup as below Confirm the settingsVideo Resolution Chart OutputOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

SR608 specifications

The Onkyo SR608 is a versatile 7.2-channel home theater receiver that has gained popularity among audio enthusiasts for its impressive combination of features and performance. Launched as part of Onkyo's highly regarded line of A/V receivers, the SR608 stands out for its robust build quality, advanced technology, and user-friendly design.

One of the key features of the Onkyo SR608 is its onboard support for high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats deliver a lossless audio experience, allowing users to enjoy movies and music with unparalleled clarity and detail. Additionally, the receiver is equipped with advanced decoding capabilities, ensuring that it can handle various audio formats from different sources seamlessly.

The SR608 is also noteworthy for its video processing capabilities. It supports video upscaling up to 1080p through its Faroudja DCDi Cinema technology, allowing users to enhance standard-definition content and make it look sharper on high-definition displays. The receiver features multiple HDMI inputs, enabling users to connect a range of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another significant characteristic of the Onkyo SR608 is its robust amplifier section, which delivers a powerful output of 100 watts per channel (into 8 ohms). This ensures that even the most demanding audio tracks can be reproduced with accuracy and depth, making it ideal for a home theater setup that aims to provide an immersive audio experience. The receiver also includes dual subwoofer outputs, allowing for flexible bass management and the ability to create a more dynamic low-frequency response.

For those who appreciate convenience and connectivity, the SR608 comes equipped with a front-panel USB port, providing access to digital music files. Wi-Fi and Bluetooth compatibility can be added through optional adapters, enabling users to stream audio wirelessly from their smartphones or tablets. The receiver is also equipped with Onkyo’s exclusive Audyssey 2EQ technology, which automatically analyzes the acoustics of a room and calibrates the receiver’s settings for optimal sound performance.

In summary, the Onkyo SR608 is a feature-rich A/V receiver that combines powerful audio performance with advanced video processing, making it a favorite among home theater enthusiasts. Its extensive connectivity options, coupled with user-friendly technology, ensure that it remains a strong choice for those looking to build or upgrade their home entertainment system.
Top Page Image Contents