Menu Configuration—MAIN MENU
For the operation procedure, see page 7.
When VIDEO 1 or VIDEO 2 is selected for the input:
Selected Picture Mode
Select by pressing PICTURE MODE on the front panel (☞ 7 on page 6). (Not displayed when “STD.” is selected.)
Operation guide
Shows the buttons for each operation.
When RGB is selected for the input:
Press 
to perform “AUTO ADJUST.”
Operation guide
Shows the buttons for each operation.
When DVI is selected for the input:
Operation guide
Shows the buttons for each operation.
•The menu automatically disappears in about 30 seconds after the previous operation.
•Some items may not appear on the menu depending on the input or the input signal.
•The items controlled by the MAKE system do not appear on the menu.
10
BACK LIGHT Setting value: 00 – 25
Adjusts the brightness of the display.
SHARPNESS*1, 2 Setting value: 00 – 10
Adjusts the sharpness of the picture.
CTI.*1, 2 Setting value: OFF, NORMAL, HARD
Adjusts the clearness of the outlines of the chrominance signal.
• This setting does not affect BW signals.
LTI.*1, 2 Setting value: OFF, NORMAL, HARD
Adjusts the clearness of the outlines of the luminance signal.
COLOR SYSTEM*1 Setting value: AUTO, NTSC, PAL
Selects the color system.
• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”
ASPECT*1 Setting value: 4:3, 16:9
Selects the aspect ratio.
sub menu POSI. Setting value: LOWER, UPPER
Selects the position of the picture adjustment bar and volume adjustment bar.
AUTO ADJUST*3
Adjusts pictures of analog RGB signals automatically. Perform this adjustment when you input analog RGB signals for the first time.
•Pictures may not be adjusted properly when you perform “AUTO ADJUST” with a picture of texts or images on a black background. Perform “AUTO ADJUST” when an image is displayed fully on the screen.
•After performing “AUTO ADJUST,” you can adjust each item manually.
Item | To do | Setting value | |
H.SIZE*4 | Adjust the horizontal picture size. | ||
H.POSI.*4 | Adjust the horizontal picture position. | 000 | – 100 |
V.SIZE*4 | Adjust the vertical picture size. | ||
V.POSI.*4 | Adjust the vertical picture position. | 000 | – 082*5 |
DOT CLOCK*4 | Eliminates stripes or flickering by adjusting the both | 000 | – 100 |
CLOCK | settings. | 000 | – 063 |
PHASE*4 |
|
|
|
*1 Displayed only when VIDEO 1 or VIDEO 2 is selected for the input.
*2 Memorized for each Picture Mode (☞ “ 7 PICTURE MODE button/lamp” on page 6). *3 Displayed only when RGB is selected for the input.
*4 Memorized for each signal format. For some signals, the adjustment may not take effect.
*5 The maximum value is different depending on the incoming signal format (“082” is an example for SXGA signals).