JVC LM-H171, LM-H191 manual Adjusts the standard level for the picture adjustment

Menu Configuration—SET UP MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

Selected screen size

Select by pressing SCAN SIZE on the front panel (☞ 6 on page 6).

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment.

Item	To do		Setting value
CONTRAST*1	Adjust the standard level for the contrast adjusted with
	CONTRAST button on the front panel.
BRIGHT*1	Adjust the standard level for the brightness adjusted
	with BRIGHT button on the front panel.		–40 – +40
CHROMA*1, 2	Adjust the standard level for the chroma adjusted with
	CHROMA button on the front panel.
PHASE*1, 2	Adjust the standard level for the phase adjusted with
	PHASE button on the front panel.
sub menu	Display the adjustment bar for each item of “PICTURE SUB ADJ.”
	Select an item by pressing	, then adjust the picture while viewing the actual picture.
reset	Restore the default settings for all the items in “PICTURE SUB ADJ.” regardless of the
	adjustments for the Picture Mode (☞ “ 7 PICTURE MODE button/lamp“ on page 6).

WHITE BALANCE SET.

Selects the color temperature and adjusts the drive level of each color (R/G/B).

Item	To do		Setting value
COLOR TEMP.	Select the color temperature.		HIGH, LOW, USER
R DRIVE, G DRIVE,	Adjust the drive level of each color (red, green, and		–20 – +20 (–255 – 255 when
B DRIVE*3	blue).		“USER” is selected for “COLOR
			TEMP.”)
sub menu	Display the adjustment bar for each item of “WHITE BALANCE SET.”
	Select an item by pressing	, then adjust the picture while viewing the actual picture.
reset	Restore the default settings for all the items in “WHITE BALANCE SET.”

SIZE/POSI. ADJ.*2

Adjusts the size and position of the picture.

• When RGB is selected for the input, perform “AUTO ADJUST” (☞ page 10).

Item	To do	Setting value
H.SIZE*4	Adjust the horizontal picture size.	–5 – +10 – +20
H.POSI.*4	Adjust the horizontal picture position.	–20 – 00 – +20
V.SIZE*4	Adjust the vertical picture size.	–10 – +5 – +15
V.POSI.*4	Adjust the vertical picture position.	–20 – 00 – +20
reset	Restore the default settings for all the items in “SIZE/POSI. ADJ.”

*1 Memorized for each input.

*2 Displayed only when VIDEO 1 or VIDEO 2 is selected for the input.

*3 Memorized for each input. Also, memorized for each color temperature setting. *4 Memorized for each input. Also, memorized for each SCAN SIZE setting.

ENGLISH 11