JVC DT-V9L1D Menu Configuration-MAIN Menu, Setting of Marker Select and R-MARKER Select

Page 10

Menu Configuration—MAIN MENU

For the operation procedure, see page 7.

Operation guide Shows the buttons for each operation.

The menu automatically disappears in about 30 seconds after the previous operation.

Some items may not appear on the menu depending on the input or the input signal.

The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “MARKER SELECT” and “R-MARKER SELECT”

The setting values and features are as follows.

OFF: “MARKER SELECT” and “R-MARKER SELECT” do not function.

LINE: Displays the area with an outline.

HALF: The area outside the specified aspect ratio of the screen is displayed as 50% transparency.

HALF+L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that is displayed as 50% transparency.

BLK.: The area outside the specified aspect ratio of the screen is black. Only the portion of the picture within the designated area is displayed.

BLK. +L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that becomes black so that only the area inside the line is displayed.

10

PICTURE IMPROVEMENT

Setting for the picture quality

Item

To do

Setting value

APERTURE*1

Select the frequency of the luminance signal compensated in

OFF, LOW, HIGH

 

“APERTURE LEVEL.”

 

APERTURE

Compensate the frequency response of the luminance signal of the

01 – 10

LEVEL*1

video signal.

 

sub menu

Display the sub menu which enables you to adjust the items of “PICTURE IMPROVEMENT” while

 

viewing the actual picture.

 

reset

Restore the default settings for all the items in “PICTURE IMPROVEMENT.”

• When the FOCUS lamp lights, “PICTURE IMPROVEMENT” does not appear on the menu (r on page 6).

BACK LIGHT Setting value: –20 – +20

Adjusts the brightness of the display.

• When the DYNAMIC lamp lights, this item does not appear on the menu (t on page 6).

COLOR RANGE MODE Setting value: OFF, ON

Reduces the difference of the luminance level specific to the LCD panel.

When “ON” is selected, the color temperature becomes the innate temperature in the LCD panel, and the setting of “WHITE BALANCE SET.” becomes ineffective (page 12).

VIDEO/COMPO. SEL. Setting value: VIDEO, COMPO. (component)

Selects the signal type you want to use for the VIDEO/COMPONENT terminals.

When select the component (COMPO.), make sure to set the component level in “COMPO. LEVEL” in “PICTURE SUB ADJ.” (page 12).

ASPECT*1 Setting value: 4:3, 16:9

Changes the aspect ratio of the picture.

AREA MARKER*1

Setting for area marker functions

Item

To do

Setting value

MARKER SELECT*2

Select the style of the area marker.

“NOTE”

ASPECT SELECT*2

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9

SAFETY MARKER

Adjust the area of the safety marker.

OFF, 80% – 100%

R-MARKER SELECT*2

Select the style of the area marker.

“NOTE”

R-ASPECT SELECT*2

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9

R-SAFETY MARKER

Adjust the area of the safety marker.

OFF, 80% – 100%

The area marker or the safety marker is displayed by using A. MARKER or S. MARKER button, or external control.

Select either non-“R-” items or “R-” items to activate by using external control (“External Control” on page 14).

When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.

To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, hide the area marker.

*1 Memorized for each input — composite signal input (VIDEO), component signal input (COMPO.), and SDI signal input. *2 Displayed only when the picture is displayed in 16:9 aspect ratio.

Image 10
Contents DT-V9L1D Rating label is on the bottom of the monitor Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredMaintenance Higher position InstallationTo adjust the stand height Align as illustratedTo prevent an accidental fall Fix the monitor to a wall by using stringsLower position Fixing the monitorFront panel Press buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press buttons to select an audio channelRear panel Available signals To detach the cover, release the tab. TabPicture Improvement Menu Configuration-MAIN MenuSetting of Marker Select and R-MARKER Select Area MARKER*1Audio Setting Setting of E.AUDIO GroupSync Function Picture SUB ADJ Setting of sub menu PosiColor of the format indicator White Balance SETSetting value OFF, on Setting of Character SETSetting for the information display of the monitor InformationExternal Control Using the MAKE/TRIGGER systemAbout the external control Basic command list Using the RS-232C systemCommand outline Specifications of the RS-232C terminalFollowing are not malfunctions TroubleshootingSelf-check program FlashingGeneral SpecificationsInput/output terminals Side view Dimensions Unit mmFront view Rear view