Operation guide
Shows the buttons for each operation.
•The menu automatically disappears in about 30 seconds after the previous operation.
•Some items may not appear on the menu depending on the input or the input signal.
•The items controlled by the MAKE system do not appear on the menu.
NOTE
Setting of “CHARACTER SET.”
Assign a name for each video source following the steps below.
1Change the input to one that you want to assign a video source name for (VIDEO/COMPO. or SDI).
•You cannot store different video source names for composite signal input (VIDEO) and component signal input (COMPO.).
2 Select “CHARACTER SET.”
3Press 
buttons to select the first character.
•Each time you press 
button, the character changes as follows. Press 
button to reverse the order.
Space
4Press 
button to move the arrow to the next.
• The characters entered before moving the arrow are memorized.
5Repeat steps 3 and 4 (10 characters at maximum).
6Press MENU button to store the name.
REMOTE SETTING (☞ “External Control” on pages 14 and 15)
Setting for the external control
Item | To do | Setting value |
TYPE SEL. | Select the external control method for the | MAKE, TRIGGER, SET |
| MAKE/TRIGGER terminal. |
|
PIN1, PIN2, PIN3, | Assign the control functions to the pins of | COLOR OFF, SCR CHECK, A.MARKER, |
PIN4, PIN5 | the MAKE/TRIGGER terminal. | S.MARKER, FOCUS, DYNAMIC, SDI, VIDEO/ |
| • Assign a function to each pin terminal | COMPO., ASPECT, TALLY SEL, SOURCE ID, |
| by selecting “SET” in “TYPE SEL.” | MUTING, MARK.SEL, L.METER, STATUS, COLOR |
| (The functions are assigned for “PIN6” | RANGE, – – – (no function) |
| – “PIN8” and you cannot change the |
|
| assignment of these functions.) |
|
INFORMATION
Setting for the information display of the monitor
Item | To do | Setting value |
SOURCE ID | Select if the name assigned in “CHARACTER SET.” is displayed on | OFF, ON |
| the screen (☞ “About the Information Display” on page 7). |
|
CHARACTER SET. | Assign a name to each video source as you like (10 characters at | ☞ “NOTE” |
| maximum). You can also enter a name using the |
|
STATUS DISPLAY | Select if the status of the current input and setting of muting are | AUTO, OFF, ON |
| displayed on the screen (☞ “About the Status Display” on page 7). |
|
SUB HOUR METER | Display the hours of use (unit: hour). You can reset this item. |
|
MODEL | Display the model name of the monitor. |
|
VERSION | Display the version of the monitor. |
|
HOUR METER | Display the total hours of use (unit: hour). This item is used for the maintenance of the monitor. | |
| You cannot reset this item. |
|
Setting value: OFF, ON
Turns on (or off) the control lock function to disable the buttons on the front panel.
•The following operations are available even when this function is activated.
–Turning on/off (on standby) the monitor
–Displaying the 
button while pressing 
button) and turning “CONTROL LOCK” to “OFF”
–Operating the monitor by an external control
If you try other operations, “ 
Control lock on!” appears on the screen.
all reset
Restores all the settings and adjustments of the monitor to the default.
•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
•When you operate the monitor with the AC power supply, the monitor is turned off (on standby) then turned on automatically. When you operate the monitor with the DC 12 V power supply, the monitor is turned off (on standby).
ENGLISH13