JVC DT-V1900CG manual Preparation,  Installing the Input Card,  Attaching the Wide Mask

Page 10

PREPARATION

INSTALLING THE INPUT

CARD

Optional input cards are necessary to use the functions of this monitor. Before mounting the monitor or connecting other equipment to the monitor, be sure to install the input cards.

1.Turn off the Multi-Format Monitor’s main power and unplug the power cable from the AC outlet.

2.Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card.

Slot cover

Rear side of the DT-V1900CG

Multi-Format Monitor

3.Insert the Input Card’s board (green- coloured) into the slot, fitting the board into the guide rails on the top and bottom of the slot.

Fit the board to the guide rails.

Knob

Guide rails

Input card (the illustration shown

is of the IF-C01PNG)

Knob

4.Push the Input Card in so that its front panel touches the monitor’s rear panel.

5.Secure the Input Card by replacing the screws removed in Procedure 2.

NOTE : Do not touch the terminal connected to the monitor or board pattern.

Do not remove slot covers from the monitor’s slots if they are not in use.

ATTACHING THE WIDE

MASK

A wide mask is provided with the monitor. This changes the viewable screen area to the 16:9 aspect ratio.

The wide mask cannot be attached to the monitor after the monitor is mounted in a rack. Mount the wide mask before installing the monitor in a rack.

1.Prepare the provided wide mask and 4 screws (for attaching).

2.Attach the wide mask to the monitor.

3.Secure the wide mask with the screws (fix 2 screws each to both right and left side).

●When detaching the wide mask, follow this procedure in reverse.

ENGLISH

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DT-V1900CGINSTRUCTIONS MULTI-FORMAT MonitorDT-V1900CG Safety Precautions FCC Notice U.S.A. onlyEMC Supplement Europe only Power cordHow to replace the fuse Cable LengthControls and Features Front ViewMain power switch Power lampPower switch Aspect button/lamp Video Input Card Optional IF-C01PNG  COMPONENT/RGB Input Card Optional IF-C01COMGInput Card Optional  HD SDI Input Card Optional IF-C01HSDG Input terminals for component serial digital signals SDI Input Card Optional IF-C01SDG Connection terminal to a Multi-Format HD SDI Input Card Optional IF-C12HSDG Preparation  Installing the Input Card Attaching the Wide Mask  Attaching the Power Cord Holder Preparation contdBasic Menu Operations  Main Menu Screens HOW to USE Main Menu Main Menu Items Items Functions Displays Item Contents and Adjustment RANGE/SETTINGS Center Marker HOW to USE Main Menu contdArea MARKER-R Color Matrix Setup Menu Screens HOW to USE Setup Menu Setup Menu Items Items FunctionsFunction Setting HOW to USE Setup Menu contdPicture SUB ADJ Color TEMP./BAL SIZE/POSI. ADJ Distortion ADJControl Lock All resetStatus Display OFF/ONHOW to USE External Control About External ControlCommands  HOW to USE the RS-232C TerminalCommunications Specifications Communication ProceduresTroubleshooting When black vertical lines appear on the screen Following are not malfunctionsTroubleshooting cont’d  SELF-CHECK IndicationsSpecifications Usage Precautions Specifications cont’d Compliant Signal Formats of Each Input Card Input SignalsDimensions H x D Required slots Power consumptionWeight Required slots Power consumption 14 V DC, 0.25 aRequired slots Power consumption 14 V DC, 0.6A Cont’dPage DT-V1900CG Multi -FORMAT Monitor
Top Page Image Contents