JVC DT-V1900CG manual  COMPONENT/RGB Input Card Optional IF-C01COMG

Page 7

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL)

COMPONENT/RGB INPUT CARD (OPTIONAL:

IF-C01COMG)

1 Video input/output terminals

G / Y

INOUT

B/PB/B-Y

INOUT

R/PR/B-Y

INOUT

HD/CS

INOUT

VD

INOUT

AUDIO

IN OUT

1

2

3

4

Input (IN) and output (OUT) terminals for component (colour difference) or RGB signals.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select component signal : press INPUT SELECT A/C/E button

Select RGB signal : press INPUT SELECT B/D/F button

2 Synchronised signal input/output terminals

Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronised signals.

Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

3 Audio input/output terminals

Compatible signal formats:

480/60i, 576/50i, 576/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/24psF

Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected.

4 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your Multi-Format Monitor.

VIDEO INPUT CARD (OPTIONAL: IF-C01PNG)

VIDEO1

IN

OUT

1

 

VIDEO2

IN

OUT

 

 

Y/C IN

2

EXT.SYNC

5

 

3

IN

OUT

AUDIO1

IN OUT

4

AUDIO2

Compatible signal formats:

NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white (50 Hz/60 Hz)

*You can select “AUTO” (automatic selection), “NTSC” or “PAL” in SETUP MENU when switching NTSC or PAL. Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL.

1 Video input/output terminals

Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select VIDEO 1 : press INPUT SELECT A/C/E button

Select VIDEO 2 : press INPUT SELECT B/D/F button

2 S-video input terminal

Input terminal for the S-video signal.

When an S-video signal is input to this terminal and a video signal is input to VIDEO 2, the S-video signal has priority over the video signal.

When choosing the S-video input, press INPUT SELECT B/D/F button.

3 Synchronised signal input/output terminals

Input (IN) and output (OUT) terminals for the complex synchronised signals.

Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

4 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals corresponding to VIDEO 1 and VIDEO 2. The IN and OUT terminals are bridge-connected.

5 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your Multi-Format Monitor.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MULTI-FORMAT Monitor DT-V1900CGINSTRUCTIONSDT-V1900CG FCC Notice U.S.A. only Safety PrecautionsCable Length Power cordHow to replace the fuse EMC Supplement Europe onlyFront View Controls and FeaturesAspect button/lamp Power lampPower switch Main power switch Video Input Card Optional IF-C01PNG  COMPONENT/RGB Input Card Optional IF-C01COMGInput Card Optional Connection terminal to a Multi-Format Input terminals for component serial digital signals SDI Input Card Optional IF-C01SDG  HD SDI Input Card Optional IF-C01HSDG HD SDI Input Card Optional IF-C12HSDG Preparation  Installing the Input Card Attaching the Wide Mask Preparation contd  Attaching the Power Cord HolderBasic Menu Operations Items Functions Displays HOW to USE Main Menu Main Menu Items  Main Menu Screens Item Contents and Adjustment RANGE/SETTINGS Color Matrix HOW to USE Main Menu contdArea MARKER-R Center MarkerItems Functions HOW to USE Setup Menu Setup Menu Items  Setup Menu ScreensFunction Setting HOW to USE Setup Menu contdPicture SUB ADJ Color TEMP./BAL Distortion ADJ SIZE/POSI. ADJOFF/ON All resetStatus Display Control LockAbout External Control HOW to USE External ControlCommunication Procedures  HOW to USE the RS-232C TerminalCommunications Specifications CommandsTroubleshooting Following are not malfunctions When black vertical lines appear on the screen SELF-CHECK Indications Troubleshooting cont’dSpecifications Input Signals Specifications cont’d Compliant Signal Formats of Each Input Card Usage PrecautionsRequired slots Power consumption 14 V DC, 0.25 a Required slots Power consumptionWeight Dimensions H x DCont’d Required slots Power consumption 14 V DC, 0.6APage DT-V1900CG Multi -FORMAT Monitor
Top Page Image Contents