Controls and Features, Front View | JVC DT-V1900CG manual

CONTROLS AND FEATURES

FRONT VIEW

<Front Panel>

7	8	11	12	13	14
MUTING		DEGAUSS	UNDER	PULSE	COLOR
MUTING		DEGAUSS	SCAN	CROSS	OFF
VOLUME		MENU	SCREENS	ASPECT	AREA
			CHECK		MARKER
6	9	10	15	16	17

18 1920 212223

	SLOT1		SLOT2		SLOT3
A	B	C	D	E	F
		INPUT SELECT

2425

POWER

1 Tally lamp

Lights when the tally control signal is ON. Set the MAKE/ TRIGGER terminal’s tally control in the REMOTE (external control) terminal setup menu. For details, refer to Page 20. The lamp color can be set to red or green. To set the color, use TALLY SELECT in the "FUNCTION SETTING" setup menu or MAKE/TRIGGER in the REMOTE (external control) terminal setup menu. For details, refer to Page 16 and 20.

8 EMBEDDED AUDIO channel switch button

Pressing this button switches the input sound channel.

When the	!	button is pressed, the channel is advanced.
When the	!	button is pressed, channel is reversed.

NOTE: The channel indication will display the selected channel when EMBEDDED in the "FUNCTION SETTING" setup menu is selected. It is valid when an input card compliant with EMBEDDED AUDIO is installed.

2 PHASE adjustment knob

Adjusts picture hue. Turn the knob to the left to make the picture redder, and turn it to the right to make the picture greener.

3 CHROMA adjustment knob

Adjusts picture colour density. Turn the knob to the left to make the picture colour lighter, and turn it to the right to make the picture colour deeper.

4 BRIGHT adjustment knob

Adjusts picture brightness. Turn the knob to the left to make the picture darker, and turn it to the right to make the picture brighter.

5 CONTRAST adjustment knob

Adjusts picture contrast. Turn the knob to the left to make the picture contrast lower, and turn it to the right to make the picture contrast higher.

6 VOLUME buttons

Adjusts the speaker volume. Pressing this button displays the VOLUME level bar on the screen. Pressing the button again allows you to adjust speaker volume.

7 MUTING button

Pressing this button mutes the input sound. "MUTING ON" is displayed on the screen. Pressing the VOLUME "–/+" button or the MUTING button restores the sound. "MUTING OFF" is displayed on the screen. On-screen indications disappear after three seconds.

NOTE: The MUTING button functions even when nothing is displayed on screen (such as Main, Setup Menu, or Volume level bar ). In this case, "MUTING OFF" will not be displayed when the VOLUME "–/+" button is pressed. Indications will be shown even when the STATUS DISPLAY setting is "OFF."

9 Menu select buttons

Selects menu screen items or set-up menu screen.

10 MENU button

Displays, adjusts or closes a menu screen.

11 DEGAUSS button/lamp

Press the DEGAUSS button. The button lights and degaussing is performed automatically. When the degaussing is completed, the light goes off.

12 UNDER SCAN button/lamp

Press the UNDER SCAN button. The button lights and the screen is reduced (under-scan) and the whole screen is displayed. When the UNDER SCAN button is pressed while lit, the light goes off and the screen returns to normal size (over-scan). Use this function to check the whole screen.

NOTE: This function is invalid with the RGB-input screen.

13 PULSE CROSS button/lamp

Press the PULSE CROSS button. The picture is separated into 4 parts. The synchronised signal displayed in the shape of a cross separating the parts. The screen automatically brightens to make it easier to confirm synchronised sections easy. When the PULSE CROSS button is pressed while lit, the light goes off and the normal screen is restored.

NOTE: This function is invalid with the RGB-input screen.