JVC DT-V1900CG EMC Supplement Europe only, Power cord, How to replace the fuse, Cable Length

POWER CONNECTION

The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.

Power cord

Power supply voltage : AC 120 V		AC 230 V	AC 230 V
Countries	: U.S.A. and Canada	European countries	United Kingdom

Warning:

●Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock or fire.

Note for the United Kingdom power cord only

The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.

(Consult your dealer or qualified service personnel.)

How to replace the fuse

Open the fuse compartment with the blade screw driver, and

replace the fuse.

(* An example is shown in the illustration.)

Fuse

ENGLISH

EMC Supplement (Europe only)

This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments:

●Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environ- ment (far away from railways, transmitters, overhead power lines, etc.)

In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not exceeding the following length:

Cable		Length
Power cord	(attached cable)	2.0 m
Video signal cable	(coaxial cable)	2.0 m
Y/C signal cable	(shielded cable)	3.0 m
Audio signal cable	(shielded cable)	1.0 m
D-sub 9-pin cable	(shielded cable)	1.5 m
D-sub 15-pin cable	(shielded cable)	1.0 m

The inrush current of this apparatus is 20.1 ampere.

Caution

When in case that the strong electromagnetic waves or magnetism is near the audio cable or the signal cable, the sound or the picture will contain noise. In such case, please keep the cable away from the sources of the disturbance.

3