Onkyo HT-S580 Common Functions, Using the Sleep Timer, Using Headphones, Adjusting Speaker Levels

Page 43

Common Functions—Continued

Using the Sleep Timer

With the sleep timer, you can set the AV receiver so that it automatically turns off after a set period.

Press the remote controller’s [SLEEP] button repeatedly to select the required sleep time.

You can set the sleep time from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator appears on the display when the sleep timer has been set, as shown. The specified sleep time appears on the display for about five seconds, then the previous display reappears.

SLEEP indicator

To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver’s PHONES jack for pri- vate listening, as shown.

STANDBY/ON

PHONES

Notes:

•Always turn down the volume before connecting your headphones.

•Speaker sets A and B are turned off while the head- phones plug is inserted in the PHONES jack.

•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Mono, Stereo, or Direct.

•When the multichannel DVD input is selected, only the front left and front right channels can be heard in the headphones.

Adjusting Speaker Levels

You can adjust the level of each speaker in speaker set A while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby.

1

Use the remote controller’s

 

 

[CH SEL] button to select each

 

speaker, and use the [LEVEL–]

 

and [LEVEL+] buttons to adjust

 

the volume.

 

You can adjust the volume of each

 

speaker from –12 dB to +12 dB

 

(–15 dB to +12 dB for the subwoofer).

Notes:

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to No or None in the Speaker Configuration cannot be adjusted.

■Speaker Set B

While speaker set B is on, you can also adjust the levels of the left and right speakers in speaker set B, from –12 dB to +12 dB.

•These settings are stored when the AV receiver is set to Standby.

•While speaker set B is on, you can adjust the levels of the left and rigt speakers in speaker set A’s and the sub- woofer.

■Headphones

While a pair of headphones is connected, you can adjust the volume of the left and right channels individually, from –12 dB to +12 dB each.

•These settings are stored when the AV receiver is set to Standby.

■Multichannel DVD Input

While the multichannel DVD input is selected, you can adjust the level of each 5.1 channel input individually, from –12 dB to +12 dB. (–30 to +12 dB for the sub- woofer.)

•These settings are stored when the AV receiver is set to Standby.

•Individual speaker levels can also be adjusted in “3. MultiLevel Setup” (see page 52).

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HT-S580 Avis Important Safety InstructionsPower PrecautionsUsing Close to a TV or Computer Speaker PrecautionsPrecautions PlacementTable of Contents FeaturesHT-R330 HTP-330 Supplied AccessoriesUsing the Remote Controller Before Using the AV receiverSetting the Voltage Selector on some models Installing the BatteriesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsVoltage Selector only some models Rear PanelSpeaker mount/bracket inserts Speaker PackageRear Speaker terminals Keyhole slotsHow to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode CDR CD, MD, & CDR ModeReverse Play button Tape ModePlay button Stop buttonEnjoying Home Theater Connecting Your SpeakersSpeaker Connection Precautions Connecting Your SpeakersConnecting Speaker Front speaker SKF-330F Surround speaker SKM-330S Using Speaker Mounts/BracketsUsing Rubber Stoppers with the Speakers Wall MountingAttach the FM antenna, as shown American Model Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksAudio Connection Formats Connecting Your ComponentsConnecting Both Audio & Video Which Connections Should I Use?Hint Connecting a TV or ProjectorVideo Connection Audio ConnectionComposite video output Connecting a DVD playerDVD player Connection DVD in VideoVideo 1 in Video Connecting a VCR or DVD Recorder for PlaybackVCR DVD recorder ConnectionConnecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingSatellite, cable Set-top box, etc Video 2 in VideoConnect one Or the otherPhono Preamp MC head amp or MC transformer Connecting a CD Player or TurntableCD Player, or Turntable with Built-in Phono Preamp Step Turntable MM with built-in phono preampCassette recorder, CDR, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderDirect Change Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbyHave you connected a component to a digital audio input? Turning OnTurning On the AV Receiver Smooth Operation in a Few Easy StepsAssigning Digital Inputs to Input Sources First Time SetupChanging the TAPE/MD/CDR Display Press the Receiver button fol First Time SetupLowed by the Setup button Speaker ConfigurationPress the remote controller’s Test Tone but Press the Setup buttonStart playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationInterpreting Surround Channel Information Using the Multichannel InputPlaying Your AV Components Displaying Source InformationListening to the Radio Using the TunerTuning into Radio Stations AM Frequency Step Setup Not North America and EuropeSelecting Preset Stations Using the TunerPresetting Radio Stations Deleting PresetsWhat is RDS? Using RDS European models onlyProgram Types Used in Europe PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Common Functions Using the OptiResponse EqualizerSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Using the Sleep TimerUsing Headphones Adjusting Speaker LevelsSelecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesDTS-ES Using the Listening ModesOnkyo Original DSP Modes About the Listening ModesDTS Using the Audio Adjust Functions Adjusting the Listening ModesInput Channel Settings PL II Music Mode Settings Adjusting the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERRecording the Input Source RecordingRecording from Different AV Sources Double Bass Advanced SetupAdvanced Speaker Settings Crossover FrequencySpeaker Distance Advanced SetupSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Can’t record? Remote controller doesn’t work?Sound changes when I connect my head- phones? Can’t control other components?Tuner Section SpecificationAmplifier Section Video Section1ch Home Theater Speaker Pachage SpecificationMemo Memo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office

HT-S580 specifications

The Onkyo HT-S580 is a home theater system that embodies the perfect combination of advanced technology, user-friendly design, and impressive audio performance. Tailored for cinema enthusiasts and audiophiles alike, this system provides a complete home entertainment solution that elevates the audio and visual experience to unprecedented levels.

One of the standout features of the Onkyo HT-S580 is its 5.1 channel surround sound capability. Thanks to its powerful receiver, users can enjoy immersive audio from multiple sources, making films, music, and games come alive. This system supports Dolby TrueHD and DTS-HD Master Audio, ensuring that every sound detail is preserved and delivered with remarkable clarity and precision.

The HT-S580 also incorporates HDMI connections, including HDMI ARC (Audio Return Channel), allowing for a streamlined connection to compatible TVs and devices. This feature simplifies the setup by requiring only one cable for both audio and video transmission, reducing cable clutter while delivering high-definition sound. The system supports 4K video pass-through and is compatible with HDCP 2.2, making it a future-proof choice for users investing in ultra-high-definition content.

Equipped with a sleek and stylish design, the Onkyo HT-S580 seamlessly fits into any home theater setup. The compact subwoofer and satellite speakers are aesthetically pleasing, yet powerful enough to fill a room with rich audio. The system also features a variety of connectivity options, including Bluetooth for streaming music wirelessly from smartphones or tablets, which adds to its versatility.

Another impressive characteristic of the HT-S580 is the AccuEQ room calibration technology. This innovation automatically analyzes the room's acoustics and adjusts the speaker settings to optimize sound performance, ensuring an exceptional listening experience regardless of the environment.

With a remote control that offers convenient access to settings and functions, the Onkyo HT-S580 prioritizes user convenience. Combine this with its robust sound output and modern features, and it becomes clear why this home theater system stands out in the crowded audio market. The Onkyo HT-S580 is an ideal choice for those seeking a reliable, high-quality, and versatile home theater experience.
Top Page Image Contents