Onkyo HT-S580 instruction manual Advanced Setup, Speaker Distance, Speaker Levels

Page 51

Advanced Setup—Continued

Speaker Distance

To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis- tance from each speaker to the listening position.

1

Measure and make a note of the

 

 

distance from each speaker to

 

the listening position.

 

 

2

Press the [RECEIVER] button fol-

 

 

lowed by the [SETUP] button on

 

 

 

the remote controller.

3 Use the Up and Down []/[ ] buttons to select “2. Sp Dis- tance,” and then press the [ENTER] button.

4

While “Unit” is displayed, use the

 

 

Left and Right [ ]/[ ] buttons to

 

select “feet” or “meters”.

feet: Distances in feet. Can be set from 1 to 30 feet in 1-foot steps.

meters: Distances in meters. Can be set from 0.3 to 9 meters in 0.3-meter steps.

5

Use the Down [

] button to

 

select “Front,” and use the Left

 

and Right [ ]/[

] buttons to

specify the distance for the “front speakers,” then press the Down [ ] button to select the next speaker.

6

Repeat step 5 for all speakers.

 

 

Note:

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 34)

 

cannot be selected.

 

 

7

Press the [SETUP] button.

 

 

Setup closes.

 

 

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight and Surr Left distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Speaker Levels

With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.

Speaker levels cannot be adjusted while the AV receiver is muted.

1

Press the [RECEIVER] button fol-

 

 

lowed by the [SETUP] button on

 

the remote controller.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “3. Level Cal,”

and then press the [ENTER] but- ton.

A pink noise test tone is output by the front left speaker.

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

While each speaker outputs the test

 

tone, its name appears on the display, as

 

shown.

 

 

 

 

 

 

 

 

 

 

 

 

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents HT-S580 Avis Important Safety InstructionsPower PrecautionsUsing Close to a TV or Computer Speaker PrecautionsPrecautions PlacementTable of Contents FeaturesHT-R330 HTP-330 Supplied AccessoriesUsing the Remote Controller Before Using the AV receiverSetting the Voltage Selector on some models Installing the BatteriesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsVoltage Selector only some models Rear PanelSpeaker mount/bracket inserts Speaker PackageRear Speaker terminals Keyhole slotsRemote Controller How to Use the Remote ControllerReceiver Mode Remote Controller DVD Mode CDR CD, MD, & CDR ModeReverse Play button Tape ModePlay button Stop buttonEnjoying Home Theater Connecting Your SpeakersConnecting Your Speakers Speaker Connection PrecautionsConnecting Speaker Front speaker SKF-330F Surround speaker SKM-330S Using Speaker Mounts/BracketsUsing Rubber Stoppers with the Speakers Wall MountingAttach the FM antenna, as shown American Model Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksAudio Connection Formats Connecting Your ComponentsConnecting Both Audio & Video Which Connections Should I Use?Hint Connecting a TV or ProjectorVideo Connection Audio ConnectionComposite video output Connecting a DVD playerDVD player Connection DVD in VideoVideo 1 in Video Connecting a VCR or DVD Recorder for PlaybackVCR DVD recorder ConnectionConnecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingSatellite, cable Set-top box, etc Video 2 in VideoConnect one Or the otherPhono Preamp MC head amp or MC transformer Connecting a CD Player or TurntableCD Player, or Turntable with Built-in Phono Preamp Step Turntable MM with built-in phono preampCassette recorder, CDR, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderDirect Change Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbyHave you connected a component to a digital audio input? Turning OnTurning On the AV Receiver Smooth Operation in a Few Easy StepsFirst Time Setup Assigning Digital Inputs to Input SourcesChanging the TAPE/MD/CDR Display Press the Receiver button fol First Time SetupLowed by the Setup button Speaker ConfigurationPress the remote controller’s Test Tone but Press the Setup buttonStart playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationInterpreting Surround Channel Information Using the Multichannel InputPlaying Your AV Components Displaying Source InformationListening to the Radio Using the TunerTuning into Radio Stations AM Frequency Step Setup Not North America and EuropeSelecting Preset Stations Using the TunerPresetting Radio Stations Deleting PresetsUsing RDS European models only What is RDS?Program Types Used in Europe PTY Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Common Functions Using the OptiResponse EqualizerSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Using the Sleep TimerUsing Headphones Adjusting Speaker LevelsSelecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesDTS-ES Using the Listening ModesAbout the Listening Modes Onkyo Original DSP ModesDTS Adjusting the Listening Modes Using the Audio Adjust FunctionsInput Channel Settings PL II Music Mode Settings Adjusting the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERRecording Recording the Input SourceRecording from Different AV Sources Double Bass Advanced SetupAdvanced Speaker Settings Crossover FrequencyAdvanced Setup Speaker DistanceSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Can’t record? Remote controller doesn’t work?Sound changes when I connect my head- phones? Can’t control other components?Tuner Section SpecificationAmplifier Section Video Section1ch Home Theater Speaker Pachage SpecificationMemo Memo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office

HT-S580 specifications

The Onkyo HT-S580 is a home theater system that embodies the perfect combination of advanced technology, user-friendly design, and impressive audio performance. Tailored for cinema enthusiasts and audiophiles alike, this system provides a complete home entertainment solution that elevates the audio and visual experience to unprecedented levels.

One of the standout features of the Onkyo HT-S580 is its 5.1 channel surround sound capability. Thanks to its powerful receiver, users can enjoy immersive audio from multiple sources, making films, music, and games come alive. This system supports Dolby TrueHD and DTS-HD Master Audio, ensuring that every sound detail is preserved and delivered with remarkable clarity and precision.

The HT-S580 also incorporates HDMI connections, including HDMI ARC (Audio Return Channel), allowing for a streamlined connection to compatible TVs and devices. This feature simplifies the setup by requiring only one cable for both audio and video transmission, reducing cable clutter while delivering high-definition sound. The system supports 4K video pass-through and is compatible with HDCP 2.2, making it a future-proof choice for users investing in ultra-high-definition content.

Equipped with a sleek and stylish design, the Onkyo HT-S580 seamlessly fits into any home theater setup. The compact subwoofer and satellite speakers are aesthetically pleasing, yet powerful enough to fill a room with rich audio. The system also features a variety of connectivity options, including Bluetooth for streaming music wirelessly from smartphones or tablets, which adds to its versatility.

Another impressive characteristic of the HT-S580 is the AccuEQ room calibration technology. This innovation automatically analyzes the room's acoustics and adjusts the speaker settings to optimize sound performance, ensuring an exceptional listening experience regardless of the environment.

With a remote control that offers convenient access to settings and functions, the Onkyo HT-S580 prioritizes user convenience. Combine this with its robust sound output and modern features, and it becomes clear why this home theater system stands out in the crowded audio market. The Onkyo HT-S580 is an ideal choice for those seeking a reliable, high-quality, and versatile home theater experience.
Top Page Image Contents