Onkyo HT-S580 instruction manual Digital Input Signal Formats

Page 52

Advanced Setup—Continued

4

Use the Left and Right [

]/[ ]

 

buttons to adjust the speaker

 

level, and use the Down [

] but-

 

ton to select the next speaker.

The level can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

5

Repeat step 4 so that the level of

 

 

the test tone from each speaker

 

is the same.

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 34) do

 

not output the test tone.

 

 

6

Press the [SETUP] button.

 

 

Setup closes.

 

Don’t forget to turn down the volume if

 

you turned it up while setting the levels.

 

 

Note:

•A quicker way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to output the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the levels, and use the [CH SEL] button to select the speakers.

•If the multichannel input is selected (page 37), in step 2, the “3. MultiLevel” menu appears instead of the “3. Level Cal” menu, and you can adjust the level of each channel of the multichannel input regardless of the Speaker Configuration settings.

Digital Input Signal Formats

The following table shows the display indicators for each supported digital signal format.

Format

Display

 

 

 

 

 

 

 

Dolby Digital

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM

 

 

PCM

 

 

 

 

 

 

 

Normally, the AV receiver detects the signal format auto- matically. However, if you experience either of the fol- lowing issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS:

•If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM.

•If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS.

TUNING / PRESET

MASTER VOLUME

 

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

STANDBY

 

 

 

 

 

 

 

 

 

A

SPEAKERS

B

TONE

+

STEREO

LISTENING MODE

DISPLAY DIGITAL INPUT

RT/PTY/TP

MEMORY TUNING MODE

RETURN

SETUP

 

 

 

 

 

 

 

 

 

 

CLEAR

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MULTl CH

DVD

VIDEO 1/VCR

VIDEO 2

VIDEO 3

 

TAPE

TUNER

 

CD

DIGITAL INPUT

1

Press and hold the AV receiver’s [DIGITAL

 

INPUT] button for about 3 seconds.

 

 

2

While “Auto” is displayed (about 3 sec-

 

onds), press the [DIGITAL INPUT] button

again to select: PCM, DTS, or Auto.

DTS or PCM: The DTS or PCM indicator, depending on which format you have set, flashes, and only signals in that format are output. Digital signals in other formats are ignored.

Auto (default): The format is detected automati- cally. If no digital input signal is present, the cor- responding analog input is used instead.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents HT-S580 Important Safety Instructions AvisPrecautions PowerSpeaker Precautions PrecautionsPlacement Using Close to a TV or ComputerFeatures Table of ContentsSupplied Accessories HT-R330 HTP-330Before Using the AV receiver Setting the Voltage Selector on some modelsInstalling the Batteries Using the Remote ControllerFront & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Voltage Selector only some modelsSpeaker Package Rear Speaker terminalsKeyhole slots Speaker mount/bracket insertsHow to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode CD, MD, & CDR Mode CDRTape Mode Play buttonStop button Reverse Play buttonConnecting Your Speakers Enjoying Home TheaterSpeaker Connection Precautions Connecting Your SpeakersConnecting Speaker Using Speaker Mounts/Brackets Using Rubber Stoppers with the SpeakersWall Mounting Front speaker SKF-330F Surround speaker SKM-330SConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Audio Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player DVD player ConnectionDVD in Video Composite video outputConnecting a VCR or DVD Recorder for Playback VCRDVD recorder Connection Video 1 in VideoConnecting a VCR or DVD Recorder for Recording Connecting a Camcorder, Games Console, or Other DeviceVideo 2 in Video Connect oneOr the other Satellite, cable Set-top box, etcConnecting a CD Player or Turntable CD Player, or Turntable with Built-in Phono Preamp StepTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Cassette recorder, CDR, etcConnecting Onkyo Components Connecting the Power CordAuto Power On/Standby Direct ChangeTurning On Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Assigning Digital Inputs to Input Sources First Time SetupChanging the TAPE/MD/CDR Display First Time Setup Lowed by the Setup buttonSpeaker Configuration Press the Receiver button folPress the Setup button Press the remote controller’s Test Tone butSelect a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Interpreting Surround Channel InformationUsing the Tuner Tuning into Radio StationsAM Frequency Step Setup Not North America and Europe Listening to the RadioUsing the Tuner Presetting Radio StationsDeleting Presets Selecting Preset StationsWhat is RDS? Using RDS European models onlyProgram Types Used in Europe PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the OptiResponse Equalizer Setting the Display BrightnessAdjusting the Bass & Treble Common FunctionsUsing the Sleep Timer Using HeadphonesAdjusting Speaker Levels Common FunctionsUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes DTS-ESOnkyo Original DSP Modes About the Listening ModesDTS Using the Audio Adjust Functions Adjusting the Listening ModesInput Channel Settings Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER PL II Music Mode SettingsRecording the Input Source RecordingRecording from Different AV Sources Advanced Setup Advanced Speaker SettingsCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Remote controller doesn’t work? Sound changes when I connect my head- phones?Can’t control other components? Can’t record?Specification Amplifier SectionVideo Section Tuner SectionSpecification 1ch Home Theater Speaker PachageMemo Memo Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo Europe UK Office Onkyo China Limited

HT-S580 specifications

The Onkyo HT-S580 is a home theater system that embodies the perfect combination of advanced technology, user-friendly design, and impressive audio performance. Tailored for cinema enthusiasts and audiophiles alike, this system provides a complete home entertainment solution that elevates the audio and visual experience to unprecedented levels.

One of the standout features of the Onkyo HT-S580 is its 5.1 channel surround sound capability. Thanks to its powerful receiver, users can enjoy immersive audio from multiple sources, making films, music, and games come alive. This system supports Dolby TrueHD and DTS-HD Master Audio, ensuring that every sound detail is preserved and delivered with remarkable clarity and precision.

The HT-S580 also incorporates HDMI connections, including HDMI ARC (Audio Return Channel), allowing for a streamlined connection to compatible TVs and devices. This feature simplifies the setup by requiring only one cable for both audio and video transmission, reducing cable clutter while delivering high-definition sound. The system supports 4K video pass-through and is compatible with HDCP 2.2, making it a future-proof choice for users investing in ultra-high-definition content.

Equipped with a sleek and stylish design, the Onkyo HT-S580 seamlessly fits into any home theater setup. The compact subwoofer and satellite speakers are aesthetically pleasing, yet powerful enough to fill a room with rich audio. The system also features a variety of connectivity options, including Bluetooth for streaming music wirelessly from smartphones or tablets, which adds to its versatility.

Another impressive characteristic of the HT-S580 is the AccuEQ room calibration technology. This innovation automatically analyzes the room's acoustics and adjusts the speaker settings to optimize sound performance, ensuring an exceptional listening experience regardless of the environment.

With a remote control that offers convenient access to settings and functions, the Onkyo HT-S580 prioritizes user convenience. Combine this with its robust sound output and modern features, and it becomes clear why this home theater system stands out in the crowded audio market. The Onkyo HT-S580 is an ideal choice for those seeking a reliable, high-quality, and versatile home theater experience.
Top Page Image Contents