Elmo CRP-26 owner manual Video Input Image Adjustment, Color, Tint

Video Input

Image Adjustment

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Image
	adjust and then press the Point ► or the SELECT
	button.
2	Use the Point ▲▼ buttons select the desired item
	and then press the SELECT button to display the

adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.

Contrast

Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).

Brightness

Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63).

Color

Press the Point ◄ button decrease the intensity of the color; press the Point ► button increase the intensity of the color (from 0 to 63).

Tint

Press the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color temp.

Use the Point ◄► buttons to select the desired Color temp. level (High, Mid, Low, or XLow).

White balance (Red)

Press the Point ◄ button to lighten red tone; press the Point

►button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63).

Note:

Image Adjust Menu

Reset

Store

Selected Image mode

Reset

Store

Use the Point ◄► buttons to adjust the setting value.

•When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.

•Tint cannot be selected when the video system is PAL, SECAM, PAL-Mor PAL-N(p.38).

•When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard.

40