Elmo CRP-26 owner manual Ceiling, Rear, Terminal, Computer, Monitor Out

Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Ceiling

Rear

Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back			Terminal
of the projector is switchable for computer input or monitor
output. (See page 9) Select Computer 2 or Monitor Out
with the Point ▲▼ buttons.
Computer 2	.	computer input
Monitor Out	.	monitor out

Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer 1, and so on) so that the Terminal function will be available. (p.25, 36, 37)

49