Onkyo HT-S3300 Level Cal Level Calibration, Audio Adjust, Multiplex/Mono Settings, Dolby Settings

Page 33

■Left, Center, Right, Surround Right, Surround Left, Subwoofer

`Specify the distance from the each speaker to your lis- tening position.

Note

•The speaker distance setting cannot be changed while a pair of headphones is connected, or “Audio TV OUT” setting is set to “On” (➔ 36) or Speakers B is on.

•Speakers that you set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ 32) cannot be selected.

•The Center, Right, and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the Center, Right, and Sub- woofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the SurrRight and SurrLeft dis- tances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Level Cal (Level Calibration)

Menu

Level Cal

Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position.

■Left, Center*1, Right, Surround Right, Surround

Left

`–12 dB to 0 dB to +12 dB in 1 dB step.

■Subwoofer*1

`–15 dB to 0 dB to +12 dB in 1 dB step.

Note

•Speakers that you set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ 32) cannot be selected.

•The speakers cannot be calibrated while a pair of headphones is connected, Speakers B is on, or “Audio TV OUT” setting is set

to “On” (➔ 36) or the AV receiver is muted.

*1 For the center speaker and subwoofer, the level settings made by using AUDIO are saved.

Tip

•If you’re using a handheld sound level meter, adjust the level of each speaker so that it reads 75 dB SPL at the listening position, measured with C-weighting and slow reading.

Audio Adjust

Menu

Audio Adjust

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

Multiplex/Mono Settings

Multiplex

This setting determines which channel of a stereo multi- plex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broad- casts, and so on.

■Input Ch(Mux)

`Main:

The main channel is output.

`Sub:

The sub channel is output.

`M/S:

Both the main and sub channels are output.

Mono

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

■Input Ch(Mono)

`L+R:

Both the left and right channels are output.

`Left:

Only the left channel is output.

`Right:

Only the right channel is output.

Dolby Settings

PLII Music (2ch Input)

These settings apply to only 2-channel stereo sources.

■Panorama

`On:

Panorama function on.

`Off:

Panorama function off.

With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic II Music listening mode.

■Dimension

`–3to 0 to +3

With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic II Music listening mode. Higher settings move the sound field backward. Lower settings move it forward.

If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move it backward.

■Center Width

`0 to 3 to 7

With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic II Music listening mode. Normally, if you’re using a center speaker, the center channel sound is out- put by only the center speaker. (If you’re not using a center speaker, the center channel sound will be distrib- uted to the front left and right speakers to create a phan- tom center). This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound.

En

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HT-S3300 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents AV Receiver HT-R380 FeaturesSpeaker Package HTP-380 SKR-380 L/R Full-Range Surround SpeakersFront Panel Front & Rear PanelsDisplay UREMOTE Control jackRear Panel Front Speakers B terminalsSpeaker Package Speaker terminalsKeyhole slots Controlling the AV Receiver Remote ControllerAbout Home Theater Speakers a and BEnjoying Home Theater Connecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Connecting the Speaker CablesRight Using the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Connected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Connecting External Components Using the AUX Input jack on the front panelHow to record the video Connecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlDepends on the Audio TV OUT setting On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off ON/STANDBYSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Press Music Optimizer on the front panelUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayTuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Recording Connecting a Recording ComponentAV Recording Recording Separate AV SourcesListening Mode Buttons Using the Listening ModesSelecting Listening Modes About Listening ModesListening Modes Speaker LayoutDTS DSD*2 Onkyo-Original DSP Listening ModesAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Component Component Video Input Hdmi InputDigital Audio Digital Audio Input SubwooferSp Distance Speaker Distance Sp Config Speaker ConfigurationMultiplex/Mono Settings Audio AdjustDolby Settings Level Cal Level CalibrationAudyssey Settings DTS SettingRemote Control Settings Theater-Dimensional SettingFM/AM Frequency Setup Settings Name EditHdmi Setup Using the Audio Settings Tone Control SettingsSpeaker Levels Late Night Function Music OptimizerCinemaFILTER Adjusting the Bass & Treble Digital Input Signal FormatsAudio Selector SyncControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockRI Dock Controlling Your iPod Without the RI ControlWith the RI Control Available buttons Random Play Mode3, 2 RepeatEntering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsVCR/PVR Enter Setup Search Repeat Random Play ModeON/STANDBY Guide TOP Menu Display MutingStandby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundAV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t record Sound changes when I connect my headphonesHow do I change the language of a multiplex source Ufunctions don’t workAV Receiver SpecificationsPassive Subwoofer SKW-380 Asian Center Speaker SKC-380C 1ch Home Theater Speaker PackageFront Speaker SKF-380 North American Center Speaker SKC-380About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH UK Branch Onkyo China Limited

HT-S3300 specifications

The Onkyo HT-S3300 is a home theater system that brings immersive sound and cinematic experiences into the living room. This system combines a powerful AV receiver with a set of quality speakers designed to deliver vibrant audio across various media formats.

At the heart of the HT-S3300 is the Onkyo TX-SR313 AV receiver, which delivers a robust 5.1-channel surround sound performance. With a power output of 100 watts per channel, it ensures that every sound from subtle whispers to explosive action scenes is rendered with clarity and strength. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enhancing the experience of watching movies and playing video games.

One of the standout features of the HT-S3300 is its ease of use, made possible by the user-friendly Onkyo remote control and the intuitive graphical user interface. The system is designed to integrate seamlessly with various devices, making it a perfect choice for those who enjoy streaming content from different sources. The receiver is equipped with several HDMI inputs, allowing users to connect Blu-ray players, gaming consoles, and smartphones without hassle. Additionally, it is compatible with 3D video formats and supports 4K video pass-through for an ultra-high-definition viewing experience.

The speaker package that accompanies the HT-S3300 consists of a powerful subwoofer and five satellite speakers. The subwoofer enhances low-frequency sounds, producing deep bass that brings movie scenes to life. The satellite speakers are compact yet provide a balanced soundstage, allowing for an immersive surround sound experience. They can be easily mounted on walls or placed on shelves, making it convenient for different room layouts.

The Onkyo HT-S3300 also features advanced technologies such as Audyssey Room Correction. This technology analyzes the acoustics of the room and adjusts the sound settings accordingly, ensuring an optimal listening experience regardless of the room’s shape or size.

In conclusion, the Onkyo HT-S3300 is a versatile home theater system perfect for those seeking quality sound and flexibility. Whether you're a movie enthusiast or a gaming aficionado, the HT-S3300’s combination of power, features, and smart technologies makes it a strong contender in the home audio market. With the HT-S3300, transforming your living space into a dynamic entertainment hub has never been easier.
Top Page Image Contents