Onkyo HT-S3300 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 53

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo- nents. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichan- nel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

•2-channel linear PCM (32–192 kHz, 16/20/24 bit)

•Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

•Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

•The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

•The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents HT-S3300 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents AV Receiver HT-R380 FeaturesSpeaker Package HTP-380 SKR-380 L/R Full-Range Surround SpeakersFront Panel Front & Rear PanelsDisplay UREMOTE Control jackRear Panel Front Speakers B terminalsKeyhole slots Speaker PackageSpeaker terminals Controlling the AV Receiver Remote ControllerEnjoying Home Theater About Home TheaterSpeakers a and B Connecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Connecting the Speaker CablesRight Wall Mounting Using the Rubber Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer Connected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Signal Components Assignable How to record the video Connecting External ComponentsUsing the AUX Input jack on the front panel Connecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlDepends on the Audio TV OUT setting On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off ON/STANDBYSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Press Music Optimizer on the front panelUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayTuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsRDS program types PTY Finding Stations by Type PTYListening to Traffic News TP Recording Connecting a Recording ComponentAV Recording Recording Separate AV SourcesListening Mode Buttons Using the Listening ModesSelecting Listening Modes About Listening ModesDTS Listening ModesSpeaker Layout DSD*2 Onkyo-Original DSP Listening ModesCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Component Component Video Input Hdmi InputDigital Audio Digital Audio Input SubwooferSp Distance Speaker Distance Sp Config Speaker ConfigurationMultiplex/Mono Settings Audio AdjustDolby Settings Level Cal Level CalibrationAudyssey Settings DTS SettingRemote Control Settings Theater-Dimensional SettingFM/AM Frequency Setup Settings Name EditHdmi Setup Speaker Levels Using the Audio SettingsTone Control Settings CinemaFILTER Late Night FunctionMusic Optimizer Adjusting the Bass & Treble Digital Input Signal FormatsAudio Selector SyncControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableRI Dock Using the Onkyo DockUP-A1 Dock With the RI Control Controlling Your iPodWithout the RI Control Available buttons Random Play Mode3, 2 RepeatEntering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsVCR/PVR Enter Setup Search Repeat Random Play ModeON/STANDBY Guide TOP Menu Display MutingStandby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundAV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t record Sound changes when I connect my headphonesHow do I change the language of a multiplex source Ufunctions don’t workAV Receiver SpecificationsPassive Subwoofer SKW-380 Asian Center Speaker SKC-380C 1ch Home Theater Speaker PackageFront Speaker SKF-380 North American Center Speaker SKC-380About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH UK Branch Onkyo China Limited

HT-S3300 specifications

The Onkyo HT-S3300 is a home theater system that brings immersive sound and cinematic experiences into the living room. This system combines a powerful AV receiver with a set of quality speakers designed to deliver vibrant audio across various media formats.

At the heart of the HT-S3300 is the Onkyo TX-SR313 AV receiver, which delivers a robust 5.1-channel surround sound performance. With a power output of 100 watts per channel, it ensures that every sound from subtle whispers to explosive action scenes is rendered with clarity and strength. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enhancing the experience of watching movies and playing video games.

One of the standout features of the HT-S3300 is its ease of use, made possible by the user-friendly Onkyo remote control and the intuitive graphical user interface. The system is designed to integrate seamlessly with various devices, making it a perfect choice for those who enjoy streaming content from different sources. The receiver is equipped with several HDMI inputs, allowing users to connect Blu-ray players, gaming consoles, and smartphones without hassle. Additionally, it is compatible with 3D video formats and supports 4K video pass-through for an ultra-high-definition viewing experience.

The speaker package that accompanies the HT-S3300 consists of a powerful subwoofer and five satellite speakers. The subwoofer enhances low-frequency sounds, producing deep bass that brings movie scenes to life. The satellite speakers are compact yet provide a balanced soundstage, allowing for an immersive surround sound experience. They can be easily mounted on walls or placed on shelves, making it convenient for different room layouts.

The Onkyo HT-S3300 also features advanced technologies such as Audyssey Room Correction. This technology analyzes the acoustics of the room and adjusts the sound settings accordingly, ensuring an optimal listening experience regardless of the room’s shape or size.

In conclusion, the Onkyo HT-S3300 is a versatile home theater system perfect for those seeking quality sound and flexibility. Whether you're a movie enthusiast or a gaming aficionado, the HT-S3300’s combination of power, features, and smart technologies makes it a strong contender in the home audio market. With the HT-S3300, transforming your living space into a dynamic entertainment hub has never been easier.
Top Page Image Contents