Onkyo Comprehensive Guide to HT S3300 Audio Settings and Features
Page 37

Note

•The “Power Control” setting can be set only when the above “HDMI Control” setting is set to “On”.

•HDMI power control only works with p-compatible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to “On”, power consumption will increase.

•When set to “On”, regardless of whether the AV receiver is On or in Standby, both audio and video stream from an HDMI input will be output to the TV or other components via HDMI connec- tion (HDMI pass through function). When the HDMI pass through function activates in standby mode, HDMI THRU indi- cator will light.

•The power consumption during standby mode will increase dur- ing the HDMI pass through function; however in the following cases, the power consumption can be saved:

1.The TV is in standby mode.

2.You are watching a TV program.

•Refer to the connected component’s instruction manual for details.

■TV Control

`Off:

TV Control disabled.

`On:

TV Control enabled.

Set to “On” when you want to control the AV receiver from an p-compatible TV that is connected to HDMI.

Note

•Do not assign the component connected with the HDMI input to the TV/CD selector when you set “TV Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

•Set to “Off” when the TV is not compatible or when it is unclear whether the TV is compatible or not.

•The “TV Control” setting can be set only when the above

“HDMI Control” and “Power Control” settings are both set to “On”.

•Refer to the connected component’s instruction manual for details.

After changing the settings of the “HDMI Control”, “Audio Return Ch”, “Power Control”, or “TV Con- trol”, turn off the power to all connected pieces of equipment and then turn them on again. Refer to the User’s Manuals for all connected pieces of equipment.

Using the Audio Settings

You can change various audio settings by pressing

AUDIO.

Note

•When the “Audio TV OUT” setting is set to “On” (➔ 36), AUDIO is disabled.

 

 

1

Press RECEIVER followed by AUDIO.

2

Use q/wto select an item, and e/rto change the

 

setting.

Repeat this step for the other settings.

Tone Control Settings

You can adjust the bass and treble for Speakers A and B front speakers, except when the Direct listening mode is selected.

■Bass

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output by the front speakers.

■Treble

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output by the front speakers.

Note

•To bypass the bass and treble tone circuits, select the Direct lis- tening mode.

•This procedure can also be performed on the AV receiver by using its TONE, –, and + buttons (➔ 39).

Speaker Levels

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Cal (Level Calibration)” (➔ 33) before setting the AV receiver to Standby.

■Subwoofer

`–15 dB to 0 dB to +12 dB in 1 dB steps

■Center

`–12 dB to 0 dB to +12 dB in 1 dB steps

Note

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ 32) cannot be adjusted.

En

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HT-S3300 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents AV Receiver HT-R380 FeaturesSpeaker Package HTP-380 SKR-380 L/R Full-Range Surround SpeakersFront Panel Front & Rear PanelsDisplay UREMOTE Control jackRear Panel Front Speakers B terminalsSpeaker terminals Speaker PackageKeyhole slots Controlling the AV Receiver Remote ControllerSpeakers a and B About Home TheaterEnjoying Home Theater Connecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Connecting the Speaker CablesRight Using the Floor Pads for Subwoofer Using the Rubber Stoppers for a More Stable PlatformWall Mounting Connected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Signal Components Assignable Connecting Components with HdmiAudio return channel ARC function Using the AUX Input jack on the front panel Connecting External ComponentsHow to record the video Connecting Antenna Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlDepends on the Audio TV OUT setting On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off ON/STANDBYSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Press Music Optimizer on the front panelUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayTuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsListening to Traffic News TP Finding Stations by Type PTYRDS program types PTY Recording Connecting a Recording ComponentAV Recording Recording Separate AV SourcesListening Mode Buttons Using the Listening ModesSelecting Listening Modes About Listening ModesSpeaker Layout Listening ModesDTS DSD*2 Onkyo-Original DSP Listening ModesOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Component Component Video Input Hdmi InputDigital Audio Digital Audio Input SubwooferSp Distance Speaker Distance Sp Config Speaker ConfigurationMultiplex/Mono Settings Audio AdjustDolby Settings Level Cal Level CalibrationAudyssey Settings DTS SettingRemote Control Settings Theater-Dimensional SettingFM/AM Frequency Setup Settings Name EditHdmi Setup Tone Control Settings Using the Audio SettingsSpeaker Levels Music Optimizer Late Night FunctionCinemaFILTER Adjusting the Bass & Treble Digital Input Signal FormatsAudio Selector SyncControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Without the RI Control Controlling Your iPodWith the RI Control Available buttons Random Play Mode3, 2 RepeatEntering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsVCR/PVR Enter Setup Search Repeat Random Play ModeON/STANDBY Guide TOP Menu Display MutingStandby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundAV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t record Sound changes when I connect my headphonesHow do I change the language of a multiplex source Ufunctions don’t workAV Receiver SpecificationsPassive Subwoofer SKW-380 Asian Center Speaker SKC-380C 1ch Home Theater Speaker PackageFront Speaker SKF-380 North American Center Speaker SKC-380Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH UK Branch Onkyo China Limited

HT-S3300 specifications

The Onkyo HT-S3300 is a home theater system that brings immersive sound and cinematic experiences into the living room. This system combines a powerful AV receiver with a set of quality speakers designed to deliver vibrant audio across various media formats.

At the heart of the HT-S3300 is the Onkyo TX-SR313 AV receiver, which delivers a robust 5.1-channel surround sound performance. With a power output of 100 watts per channel, it ensures that every sound from subtle whispers to explosive action scenes is rendered with clarity and strength. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enhancing the experience of watching movies and playing video games.

One of the standout features of the HT-S3300 is its ease of use, made possible by the user-friendly Onkyo remote control and the intuitive graphical user interface. The system is designed to integrate seamlessly with various devices, making it a perfect choice for those who enjoy streaming content from different sources. The receiver is equipped with several HDMI inputs, allowing users to connect Blu-ray players, gaming consoles, and smartphones without hassle. Additionally, it is compatible with 3D video formats and supports 4K video pass-through for an ultra-high-definition viewing experience.

The speaker package that accompanies the HT-S3300 consists of a powerful subwoofer and five satellite speakers. The subwoofer enhances low-frequency sounds, producing deep bass that brings movie scenes to life. The satellite speakers are compact yet provide a balanced soundstage, allowing for an immersive surround sound experience. They can be easily mounted on walls or placed on shelves, making it convenient for different room layouts.

The Onkyo HT-S3300 also features advanced technologies such as Audyssey Room Correction. This technology analyzes the acoustics of the room and adjusts the sound settings accordingly, ensuring an optimal listening experience regardless of the room’s shape or size.

In conclusion, the Onkyo HT-S3300 is a versatile home theater system perfect for those seeking quality sound and flexibility. Whether you're a movie enthusiast or a gaming aficionado, the HT-S3300’s combination of power, features, and smart technologies makes it a strong contender in the home audio market. With the HT-S3300, transforming your living space into a dynamic entertainment hub has never been easier.
Top Page Image Contents