Power cabling, Servicing | Sim2 Multimedia SVP 450 PLUS, SVP 420 HB

SVP 450 PLUS - SVD 500 PLUS

-Do not attempt to use it as it could be dangerous or even worsen the damage.

-If the projector is not used for long periods of time or during storms, unplug the projector temporarily from the mains to avoid damaging the projector caused by lightning or temporary overcurrents.

-Do not stand the projector on unstable surfaces as it could drop causing serious damage.

-The projector has slots for ventilating the internal components - do not cover or block them.

-Non posizionare il projector su superfici morbide. Do not postion the projector on a soft surface.

-The projector should not be made part of a fitted installation or closed unless there is sufficient ventilation.

-After technical assistance or repairs on the projector have been completed, ask the technician to carry out a safety check (all cables and components in the right position) and to make sure the projector is in proper operating conditions.

2.2 Power cabling

The projector’s mains power device is shown in the picture Fig. 2.

LINE		INPUT
•	Ve

Fig. 2

The projector operates at the following mains values:

120-240Vac 50/60Hz 270W 2,5A RMS-MAX, as specified on the rear label.

The type of fuse used is a 5A, type T (delay).

Warning:

The mains plug is the disconnect device.

Take care when installing that the mains plug and socket outlet are easily accessible.

Warning:

The projector must be earthed.

If the power socket is not equipped with an earth pin, call your electrician who will install it and ensure its efficiency. To disconnect the cable pull it out with the plug.

Do not pull the cable itself.

If you use an extension lead, make sure its rating is over 3A and is equipped with an earth wire.

2.3 Servicing

Servicing must be carried out by qualified technicians.

Do not attempt to service the projector without the proper technical knowledge. Opening the projector can expose personnel to potential hazards: high voltage and electric shock.

Unplug the mains cable and call for qualified service technicians in the following cases:

-when the power cable or plug is damaged

-when liquids are spilled on the projector.

-when rain or water has got inside the projector.

-when the projector is not working properly regardless of the fact the instructions for use have been followed correctly

-when the projector has fallen and/or its casing is damaged (broken).

-when there are noticeable variations in performance that cannot be corrected with the normal user controls.

Note: Modify only those parameters shown in the user’s section of the instruction manual. If parameters or controls are modified that are not shown in the manual a realignment of the projector might become necessary and qualified service personnel might have to be called in.

2.4 Spare parts

Use only original Multimedia spare parts.

Using components different from the original spare parts could lead to:

-A deterioration in performance.

-Fire.

-Electric shock.

-Electrical damage.

-Other.

Failure to observe the above-mentioned warning will automatically render null void the manufacturer’s guarantee.

ENGLISH

SVD 500 PLUS, SVP 420 HB, SVP 450 PLUS specifications

Sim2 Multimedia has long been a pioneer in the realm of high-performance projectors, and their products such as the SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS continue to uphold that legacy with exceptional features and cutting-edge technology.

The SVP 450 PLUS is designed for those seeking a premium viewing experience. It boasts a high-resolution DLP engine with 4K upscaling capabilities, delivering crystal-clear images with vibrant colors. Utilizing advanced color processing technology, the SVP 450 PLUS excels in enhancing color accuracy and contrast, making it ideal for both home theater setups and professional presentations. The projector also supports a variety of input options, allowing for seamless connectivity to a range of devices, including streaming boxes and laptops. Its quiet operation and long-lasting lamp life further enhance its appeal, ensuring that users can enjoy extended viewing sessions without distraction.

Meanwhile, the SVP 420 HB is tailored for users who prioritize flexibility and portability. This model features a compact design without compromising on performance. With a native resolution of 1080p, the SVP 420 HB still delivers sharp images and bright colors, ideal for both indoor and outdoor settings. Its integrated Wi-Fi capabilities allow for wireless streaming, giving users the freedom to connect their devices easily. The projector's lightweight construction and built-in rechargeable battery make it a go-to choice for professionals on the move, educators, or even outdoor movie nights.

The SVD 500 PLUS represents the pinnacle of Sim2's technology, designed for high-end applications such as large venues and auditoriums. This projector comes equipped with a powerful laser light source that offers longer lifespan and higher brightness levels, ensuring optimal performance in well-lit environments. The SVD 500 PLUS features sophisticated image processing technologies which enhance dynamic range and clarity, providing an immersive viewing experience. Additionally, its advanced lens options allow for significant flexibility in installation, accommodating various room sizes and configurations.

In conclusion, the Sim2 Multimedia SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS projectors showcase the brand’s commitment to innovation and quality. Whether for personal or professional use, these models incorporate advanced technologies and features that cater to diverse viewing needs while delivering unparalleled performance.