Sim2 Multimedia SVP 420 HB manual Batteries, RC 3100 User Remote Control, Projector Power On

Page 10

3.1 Batteries

Handling the remote control and batteries:

-Avoid exposing the remote control to heat and humidity.

-When not using the remote control for a long period of time, remove the batteries.

-Do not use new and old batteries together or batteries of a different voltage or type.

-Do not drop or mishandle the remote control.

-Use the remote control within its operating range (about 10 metres and a 30° angle)

Note: The RC3100 remote control is powered by two AA batteries.

RC 3100

BACK OF THE

REMOTE CONTROL

2 AA

1.5 V

batteries

3.2 RC 3100 User Remote Control

Read this chapter through carefully before altering any values or making any adjustments.

3.3 Projector Power On

-To turn the projector on or off, press the power swith, (a red led lights up on the rear panel), if after a few seconds the led does not turn green, press for a second.

-To turn the projector off, press for a longer time. Wait at least 3 seconds before turning the projector on again, or else the command will be ignored.

3.4 Language menu

To select the language desired for the screen displays:

Press push-button • • • for a second, the following will appear:

SVP 450 PLUS - SVD 500 PLUS

LANGUAGES

Deutsch

English

Espanol

Francaise

Italiano

Portoguese

The left arrow indicates the language in use. Use the arrows

to select the desired language. Press ENTER to confirm the selection.

Press ESC to exit the menu.

3.5 Input selection

Select a programme AV and/or the relevant input connector.

To select the input directly use a numerical button or: press push-button AV/O to enter the video input menu. The following menu will be displayed:

Press the relevant number to select the desired video input;

INPUT SELECT

1SCART / VIDEO 1

2VIDEO 2

3SCART / S-VHS

4SCART / RGB

5S-VHS

6YCrCb

7BNC 15 KHz

8BNC 31-38 KHz

9VGA

0 YCrCb 32 KHz

Note: The input Num.0 appairs only on the models provided by the progressive component input.

i.e. if one wishes to select video 2 press push-button 2 and the following indication will be displayed for a brief period of time.

VIDEO 2

3.6 Picture adjustment

To change the value of CONTRAST, BRIGHTNESS,

COLOUR, HUE (STANDARD NTSC), PEAKING.

Press the button for a second, one of the five adjustments will appear (contrast, brightness, colour, peaking and hue).

ENGLISH

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Video Projector Index User Remote Control RCInstallation General InformationComplete Function RC 3000 Remote Control .......... Electric Shock Hazard Do not Open Projector Identification Mains PowerSafety and Regulations General InformationSpare parts Power cablingServicing Servicing must be carried out by qualified techniciansRoom lighting Cleaning the projectorPacking the Projector Back panelFollowing Functions are on the Panel Power switchCathode-ray tube phosphor burning Led pilot light. Red = STAND-BY, Green = onUser Remote Control RC Exit Enter VCR Memo UPC Mute InfoPicture adjustment RC 3100 User Remote ControlProjector Power On BatteriesInfo Screen format selectionVCR button Sync filter NORMAL, SMALL, 16/9, Letter BOX, CinemaUPC button Muting video buttonNormalised button Freeze buttonBlanking White menuUPC converter Storing Switched onMenu operates only if the UPC converter is Installation menu How to enter the installation modeInstallation choice Installation Installation ProcedureInstallation Types Removing the cover Removing the top coverFront Projection Desk-top front projectionDesktop rear projection Desktop Rear ProjectionCeiling front projection MuroSpacers Ceiling rear projectionProjection angle measurement Ceiling Front ProjectionFront view of the CRT Spacers changing Spacers tableCRT Lens 180 120150 200Blue Green RED Optical and electrical adjustmentsProjector centering 100 120 150 180 30010Magnet adjustment Lens focus adjustmentMechanical centering of the tubes Remote control Setting of deflection connectorsConvergence adjustment Vertical Deflection HorizontalComplete Function RC3000 Remote Control Complete function RC3000 remote controlHow the RC 3000 remote control works Video setupTo setup the GAMMAADJ., you must enter installation mode White Cross Hatch Dots Pattern Test patternWindow Cross Hair Colour Bars White balance Memory managerHorizontal and vertical frequencies How to insert a labelHow to change an aspect ratio flag First of all, you must enter the memory managerLoad How to store a new input signalCopy Delete MoveThis function allows you to delete a memory bank Options menu Installation typesTo select the type of installation To change the displaying timeDeflection Fine picture adjustmentsFirst of all you must enetr the installation mode Deflection centreDeflection pincushion bottom Deflection dimensionsDeflection pincushion top Keystone correctionConvergence sizes Convergence skew Central convergenceConvergence linearity Convergence bowConvergence pincushion Convergence bordersScreen quarters corrections How to store the convergence adjustments How to reset the adjustmentsScreen corners corrections Technical Specifications Display Performances Electrical Data Supplied AccessoryMechanical Data Problem Causes Remedy TroubleshootingMeaning Anweisungen AUF Deutsch 13.1Hinweis gemäß behördlicher VorschriftenCod

SVD 500 PLUS, SVP 420 HB, SVP 450 PLUS specifications

Sim2 Multimedia has long been a pioneer in the realm of high-performance projectors, and their products such as the SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS continue to uphold that legacy with exceptional features and cutting-edge technology.

The SVP 450 PLUS is designed for those seeking a premium viewing experience. It boasts a high-resolution DLP engine with 4K upscaling capabilities, delivering crystal-clear images with vibrant colors. Utilizing advanced color processing technology, the SVP 450 PLUS excels in enhancing color accuracy and contrast, making it ideal for both home theater setups and professional presentations. The projector also supports a variety of input options, allowing for seamless connectivity to a range of devices, including streaming boxes and laptops. Its quiet operation and long-lasting lamp life further enhance its appeal, ensuring that users can enjoy extended viewing sessions without distraction.

Meanwhile, the SVP 420 HB is tailored for users who prioritize flexibility and portability. This model features a compact design without compromising on performance. With a native resolution of 1080p, the SVP 420 HB still delivers sharp images and bright colors, ideal for both indoor and outdoor settings. Its integrated Wi-Fi capabilities allow for wireless streaming, giving users the freedom to connect their devices easily. The projector's lightweight construction and built-in rechargeable battery make it a go-to choice for professionals on the move, educators, or even outdoor movie nights.

The SVD 500 PLUS represents the pinnacle of Sim2's technology, designed for high-end applications such as large venues and auditoriums. This projector comes equipped with a powerful laser light source that offers longer lifespan and higher brightness levels, ensuring optimal performance in well-lit environments. The SVD 500 PLUS features sophisticated image processing technologies which enhance dynamic range and clarity, providing an immersive viewing experience. Additionally, its advanced lens options allow for significant flexibility in installation, accommodating various room sizes and configurations.

In conclusion, the Sim2 Multimedia SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS projectors showcase the brand’s commitment to innovation and quality. Whether for personal or professional use, these models incorporate advanced technologies and features that cater to diverse viewing needs while delivering unparalleled performance.
Top Page Image Contents