Cathode-ray tube phosphor burning | Sim2 Multimedia SVD 500 PLUS

•THE FOLLOWING FUNCTIONS ARE ON THE PANEL:

1- Power switch.

2- Fuse holder. The fuse type is 5A, T delayed.

Attention:

For continued protection against the risk of fire, replace only with one of the same type and rating.

3- Mains power connector. To connect the power cable 90-270Vac48-62Hz

4- Video output: CVBS.

5- Video 2: CVBS: (Signal input).

6- Video 1: CVBS: (Signal input).

7- S-VHS:(Signal input).

8- Connector SCART: (Input/output).

9- Red BNC input (RGB input) or Cr (components input).

10- Green BNC input (RGB input) or Y (components input).

11- Blue BNC input (RGB input) or Cb (components input).

12- Sync H or H-V.Horizontal synchro or composite synchro.

13- Sync V. Vertical synchronism

14- RS422 connector. To connect and control the projector from a PC..

15- +12V connector (output). It has a +12V output when the projector is on. This output can activate a relay with a current less than 10mA. (for example, to enable a circuit for the automatic unwinding and rewinding of the motorised screen).

16- Screen command. It has +12V in output when the

aspect ratio selected with the button is SMALL. It is used to change screen dimensions automatically.

17- Remote control cable input. To connect the RC3000 remote control cable.

18- VGA-SVGA signals input DB 15 connector

19- Rear panel buttons:

SVP 450 PLUS - SVD 500 PLUS

Picture adjustment. Each time you press a button you select one of the follow controls:

Contrast, Brightness, Colour-Hue, Peaking. Use the + and - buttons to modify the value of the selected control.

INFO Press this button to have the current projector settings (ref. INFORMATION paragraph)

To modify the input selection sequentially; it starts the projector from the STAND-BY state.

20- Led pilot light. (Red = STAND-BY), (Green = ON).

21- LED, blinks (red) when signal from the remote control is received.

22- Remote control signal receiver (rear).

23- Remote control signal receiver (front).

2.9Cathode-ray tube phosphor burning

One of the possible causes for burning could be when a static image of a computer or video recorder signal is projected for more than an hour.

The static image remains impressed on the screen even when the signal changes.

Whenever it is necessary to visualise a static image for more than one hour lower the contrast as much as possible (CONTR key).

The same problem arises when visualising an image in a different format for a long time. The smaller picture could remain impressed on the screen (for instance, visualising a 16:9 image on a 4:3 screen or vice versa). In this case we suggest reducing the contrast of the small picture as much as possible. These measures will reduce the risk of CRT phosphor burning. If possible, always use the same picture size.

Read the warranty enclosed with the product and

consult your dealer or qualified personnel.

ENGLISH

SVD 500 PLUS, SVP 420 HB, SVP 450 PLUS specifications

Sim2 Multimedia has long been a pioneer in the realm of high-performance projectors, and their products such as the SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS continue to uphold that legacy with exceptional features and cutting-edge technology.

The SVP 450 PLUS is designed for those seeking a premium viewing experience. It boasts a high-resolution DLP engine with 4K upscaling capabilities, delivering crystal-clear images with vibrant colors. Utilizing advanced color processing technology, the SVP 450 PLUS excels in enhancing color accuracy and contrast, making it ideal for both home theater setups and professional presentations. The projector also supports a variety of input options, allowing for seamless connectivity to a range of devices, including streaming boxes and laptops. Its quiet operation and long-lasting lamp life further enhance its appeal, ensuring that users can enjoy extended viewing sessions without distraction.

Meanwhile, the SVP 420 HB is tailored for users who prioritize flexibility and portability. This model features a compact design without compromising on performance. With a native resolution of 1080p, the SVP 420 HB still delivers sharp images and bright colors, ideal for both indoor and outdoor settings. Its integrated Wi-Fi capabilities allow for wireless streaming, giving users the freedom to connect their devices easily. The projector's lightweight construction and built-in rechargeable battery make it a go-to choice for professionals on the move, educators, or even outdoor movie nights.

The SVD 500 PLUS represents the pinnacle of Sim2's technology, designed for high-end applications such as large venues and auditoriums. This projector comes equipped with a powerful laser light source that offers longer lifespan and higher brightness levels, ensuring optimal performance in well-lit environments. The SVD 500 PLUS features sophisticated image processing technologies which enhance dynamic range and clarity, providing an immersive viewing experience. Additionally, its advanced lens options allow for significant flexibility in installation, accommodating various room sizes and configurations.

In conclusion, the Sim2 Multimedia SVP 450 PLUS, SVP 420 HB, and SVD 500 PLUS projectors showcase the brand’s commitment to innovation and quality. Whether for personal or professional use, these models incorporate advanced technologies and features that cater to diverse viewing needs while delivering unparalleled performance.