Sim2 Multimedia SVP 420 HB, SVP 450 PLUS, SVD 500 PLUS How to store a new input signal, Load, Copy

SVP 450 PLUS - SVD 500 PLUS

5.8.5 How to store a new input signal

To store a new input signal in a memory bank press MEMO and you will enter the MEMORY MANAGER mode.

The following menu will appear:

WORK		MEMORY MANAGER
10	BN	NAME	F	HOR	VER
LOAD	04	Pal Upc	N	31.2	50
COPY	05	Vga 3	W	31.2	50
	06	Pup 16/9	W	31.2	50
	07	Nstc	N	15.7	60
MOVE	08	NstcUpc	N	31.4	60
	09	Vga 2	N	35.1	56
DEL	10	NTSCR	N	37.6	68

Mem adjusted value to bank

The name of the first bank available will be highlighted. Use the arrow or to write a mnemonic name. Press the right arrow to select the aspect ratio and use the arrow

or to select the desired one. Finally, press ENTER to store the new entry.

Should there be no signal, one having the following features will be stored: 31.25 KHz, 50 Hz. Press the arrow or to select field F and press ENTER to confirm the you wish to change the field. Use the arrow or to change the aspect ratio.

Press ENTER to confirm the selection or EXIT to exit. Select the desired memory bank by means of the up or down arrows. Press EXIT to exit.

Press ENTER to confirm and store the data.

Use the left or right arrow to select only the name of the bank. Press ENTER to enter in the writing mode and change the letters by means of the up or down arrow.

Press ENTER to confirm the name or EXIT to exit the menu.

Use the up or down arrows to select one of the following functions: Loading, Copy, Move, Delete and press ENTER to confirm.

Use the button to go from the right side of the menu to the left one and go back by means of the EXIT button.

To exit this menu, press EXIT. The projector will indicate the previous menu. Press ESC to exit.

5.8.6 Load

This item on the MEMORY MANAGER menu allows the user to load and change a memory bank containing all the projector adjustments.

This is possible only if there is a match between the input frequencies and the frequencies stored in the memory bank.

Use the arrow or and the left arrow to select LOAD. Press ENTER to confirm, the following menu will appear: Use the arrow or to select un memory bank from 01

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68

Load bank ?

to 25 and press ENTER. The following message will appear under the table:

Load bank 01 ?

Press ENTER to confirm or EXIT to exit.

If the input signal frequencies (horizontal and vertical) do not match the selected memory bank, the following message will appear under the table.

Done

If they do, the following message will appear:

Not permitted

Upon pressing ENTER, the memory bank number will appear under the label WORK.

Press EXIT to exit this menu. The video projector will take you back to the previous menu.

Press ESC to enter the menu again.

5.8.7 Copy

This function allows you to copy a memory location containing settings in another location.

Use the arrow or to select COPY and press ENTER, the following message will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD
	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68
Copy from		?

Use the arrow or to select a memory bank (from 01 to 25) to be copied and press ENTER.

30