Zenith PRO895X setup guide Physical Setup, Examples of Display Setup Distances and Center Points

Page 20

PHYSICAL SETUP

EXAMPLES OF DISPLAY SETUP DISTANCES AND CENTER POINTS

 

“A”*

“B”

 

Screen

Projection

Display

“Peerless”

Width

Distance

Center

Mount Center

48”

58 5/8”

26 3/8”

11”

60”

72 7/8”

30 3/4”

11”

80”

96 3/8”

38”

11”

96”

115 1/4”

43 5/8”

11”

120”

143 1/2”

52 3/8”

11”

144”

171 7/8”

61”

11”

160”

190 5/8”

66 3/4”

11”

200”

237 7/8”

81 1/8”

11”

PHYSICAL SETUP TO THE SCREEN (for all aspect ratios)

1.Set distance “A” according to the selected display width (* or calculate the distance in inches “A” = 1.179 x width) +2.063

Note: Distance “A” is measured from the cabinet panel front directly below the green CRT lens.

2.Calculate the Display Center “B” from a reference line projected from the bottom of the cabinet. Display Center “B” = A x 0.3057) + 8.44.

3. Set the projector’s height using measurement “B”. This references the bottom of the cabinet to the display center. When doing a ceiling mount, be sure to allow for the dimensions of the mounting bracket hardware.

4.Ensure that the projector is mounted horizontally centered and perpendicular to the screen.

5.The Peerless ceiling-mount center is 11” from the “A” distance reference point on the PRO895X front.

CRT Front View

P A G E 2 0

206-3634

Image 20
Contents HD Projection Display Safety Warnings Contents Installation Overview Installer’s Experience LevelNational Power Cord Requirements U.S. / Canada Other CountriesSpecifications PRO895XStandard Connections Connecting Computer Video SourcesConnecting Video and S-VIDEO Sources Connector PIN Wiring Reference Connections / Control Panel Selecting the Input SourceRemote Control Remote Control MBR3470TBattery Installation Choosing the Setup FunctionMode Name Freq Signal Type Product OverviewCabinet Removal Return To Normal ViewingRear View TOP / Inside View Setup Remote Control Setup Mode Notes and Cautions Specifications for RGB Sync Inputs Sync InputsG E 1 Screen Size Selection Courtesy of Draper Shade & ScreenSetup and Alignment Procedure Procedure OverviewSetup References Screen Projection Display Peerless Width Distance Center Physical SetupExamples of Display Setup Distances and Center Points Yoke Ring Magnet and Astigmatator Alignment System AlignmentYoke Tilt Alignment Astigmatator Alignment Procedure Ceiling/Front Projection Lens Angle Focus AlignmentRough Geometry/Convergence Setup of Green Rough Geometry/Convergence of Red and BlueIV. Final Detailed Geometry/Convergence Setup Geometry/Convergence of Other Aspect RatiosRemote Digital Display Setup Procedure Geometry ConvergenceGoal Remote Adjustment Key G E 2 LI-LIN LI LIN 206-3700