Zenith PRO895X setup guide Li-Lin Li Lin

SYSTEM ALIGNMENT

DIGITAL DISPLAY SETUP PROCEDURE CONVERGENCE OF RED AND BLUE ONTO GREEN

It is desirable to Mute color you are not adjusting. Select the color you want to adjust by pressing the RED or BLUE key.

Remote	Adjustment	Goal	Remote	Adjustment	Goal
Key			Key

1. SMALL	H. & V. Statics	Set center of video for best overlap
ARROWS		with Green (this may have to be
		‘tweaked’ during this alignment
		procedure.)
2. SIZE	H. Size	Set to match Green at C and D.
3. SIZE	V. Size	Set to match Green at A and B.
4. LIN T-B L-R	H. Lin L-R	Match Green at C and D; Iterate with
		H. Size if necessary.
5. LIN T,B L-R	V. Lin T-B	Match Green at A and B iterate with
		V. Size if necessary.
6. LIN C and	Lin C and	Match Green at 4, center line vertical
H. SIZE	SIZE	axis, midway between Z and D.
7. LI-LIN	H. LI LIN	Match Green at 3, center line vertical
		axis, midway between C & Z and LI-LIN
		(Press key twice to get the second
		function.) Caution: H. LIN C also
		affects this; adjust in correct order
		above.)
8. LIN C	V. Lin C	Match Green at 7 and 8.
9. SKEW	V. Skew	Match Green at C and D.
10. BOW	V. Bow	Match Green at C and D.
11. SKEW	H. Skew	Match Green at A and B.
12. BOW	H. Bow	Match Green at A and B.
13. KEY	V. Key	Balance error with Green at bottom
		edge G-H (left and right edges move
		in opposite directions; center is
		stable).
14. PIN	V. Pin	Match Green at right edge corners G
		& H (corners G & H move in same
		direction; center B is stable).
15. S-ING	V. ‘S’	Balance error at bottom edge in areas
		K & M (middle areas K & M move
		in opposite directions; center B and
		ends G & H are stationary).
16. W-M	V. W-M	Balance error at bottom edge in
		areas K & M (middle areas K & M move
		in same direction, center B and ends
		G & H are stationary).
17. KEY	H. key	Balance error with Green at right
		edge corners F & H (top and bottom
		move in opposite directions; center D
		is stable).
18. PIN	H. Pin	Match Green at F & H (corners F & H
		move in same direction; center D is
		stable).

19.	S-ING	H. ‘S’	Balance error at right edge in areas &
			Q (middle areas O & Q move in opposite
			direction; center D and ends F & H are
			stationary).
20.	T/L KEY	V. Top Key	Balance error with Green at top corners
			E & F straight with respect to screen
			border (left and right move in opposite
			directions; center A is stable).
21.	T/L KEY	V. Top Pin	Match Green at top edge comers E & F
			(comers E & F move in same direction;
			center A is stable).
22.	T/L S-ING	V. ‘S’	Balance error at bottom edge in areas J
			& L (middle areas J & L move in oppo-
			site directions; center A and ends E & F
			are stationary).
23.	T/L KEY	H. Left Key	Balance error with Green at left corners
			E & G (top and bottom move in oppo-
			site directions; center C is stable).
24.	T/L PIN	H. Left Pin	Match Green at left edge corners E & G
			(corners E & G move in same direction,
			center C is stable).
25.	T/L S-ING	H. ‘S’	Balance error at left edge in areas N & P
			(middle areas N & P move in opposite
			directions; center C and ends E & G are
			stationary).
26.	IN KEY	H. In Key	Average error with Green in middle areas
			J, K, and L, M (ends move in opposite
			direction centers 3 & 4 are stable, may
			require iteration with H. Skew, H. Key).
27.	IN PIN	H. In Pin	Match Green in middle areas J, K, and L,
			M (ends move in same direction: center
			is stable; may require iteration with H.
			Bow, H. Pin).
28.	IN KEY	V. In Key	Average error with Green in middle areas
			N, O, and P, Q (ends move in opposite
			direction centers 7 & 8 are stable, may
			require iteration with V. Skew, V. Key).
29.	IN-PIN	V. In Pin	Match Green in middle areas N, O and P,
			Q (may require iteration with V. Bow, V.
			Pin)
30.	Touch up all controls		Due to the interaction of IN-Controls,
			Key Controls and Pin controls for best
			overall convergence, it may be necessary
			to tweak the other controls. This should
			only require minor adjustments of each
			control.

It may be necessary to perform this procedure twice to get optimal performance.

206-3634 P A G E 2 7