CONNECTIONS / CONTROL PANEL
SELECTS MENU OPTIONS
REMOTE CONTROL WINDOW
COMMUNICATIONS PORT 
Loop Out, Loop In, Setup Switch (Set LOOP switch to “Out” if
routing composite video to a second projector.)
Selecting the Input Source
The type of input signal determines which source is being viewed. Use the Source Menu to select the source you want to view. The options in the menu correspond to the connec- tors on the connection panel.
Current Source: Video
Press 
to Select Input Press ENTER to change.
ENTER
Shows Source/Time Display
MENU
Accesses
POWER ON INDICATOR
POWER
On/Off Switch
Red, Green, Blue (RGB)
Horizontal/Vertical input jacks
COMPOSITE VIDEO INPUT
COMPOSITE VIDEO LOOP
OUT JACK
(Set LOOP switch to “Out” if using loop through.)
P A G E 8 |