Zenith PRO895X setup guide Specifications

Page 5

SPECIFICATIONS

PRO895X

Note: Specifications are subject to change without prior notice.

Optical

PROJECTION SYSTEM — CRT; 7-inch High Performance Liquid Cooled Tubes, 5-inch active phosphor area, 90 degree deflection angle, Super Oxide Cathodes.

LENSES — High resolution color corrected multi-layered coating hybrid lens system. fl.03 Aperture.

LIGHT OUTPUT — 700 Lumens peak light output.

CONVERGENCE — Digitally controlled analog with 10 factory pre- set options, 5 customer memory locations plus a copy function feature.

CONVERGENCE LIMITS — Less than 0.2% of vertical height. SELF-GENERATED SET UP PATTERNS — Cross Hatch (coarse and fine), convergence color pattern, static adjust.

SCHIEMPFLUG FOCUS — For edge focusing.

Inputs

RGB INPUTS — 5 - BNC analog (RGB H/V) with full VGA and VESA Super VGA tracking compatibility.

COMPOSITE VIDEO INPUT — 1.0 Vp-p, 75 ohm (BNC jack), loop through (NTSC 3.58, NTSC 4.43, PAL M/N, PAL B/G).

S-VIDEO INPUT — Y: 1.0 Vp-p 75 ohm; C: 0.28 Vp-p color burst level (via mini DIN) connector.

DATA COMMUNICATIONS PORT — RS232 serial port.

POWER INPUT — Dual-range power supply 90-137 Vac, 180-264 Vac, 47-63 Hz.

Video Features

Three-dimensional Digital Comb Filter.

Two-dimensional Picture Sharpness Circuitry.

Digital Dynamic Video Noise Reduction.

Color Transient Improvement.

Black Level Expansion.

Auto Flesh Tone Correction.

Video Edge Enhancement.

Color Noise Reduction.

Advanced Video DSP with 5 megabit memory.

Extra Wide-band Video Amplifiers.

High Resolution AKB with programmable white balance control.

Picture setup via source selection.

World Wide Multi-standard Video System (PAL M/N, PAL B/G, NTSC).

Aspect Ratio Correction.

Multi-Frequency, Multi-Format High Definition System (15 to 40 kHz, 75 MHz dot clock).

Addressability via IR for multiple projection unit applications.

On-Screen Display capable of 13 x 32 character display resolution.

General

HORIZONTAL SCAN FREQUENCY — 15.0 - 40.0 kHz. VERTICAL SCAN FREQUENCY — 40.0 - 100 Hz.

RETRACE TIME — Horizontal: < 3.5 µS (15.0 - 40.0 kHz).

Vertical: 450 µS (40.0 - 100 Hz).

BANDWIDTH — 37.5 MHZ (-3dB).

RGB RESOLUTION — 1920 x 1080 (interlace). VIDEO RESOLUTION — 800 TV Lines.

SIZE ADJUSTABLE — 48 - 192 inches wide.

SCREEN CONFIGURATION — Front or rear, floor or ceiling mount, with simple scan reversal.

COLOR BALANCE — Four user selectable settings: 3200/6500/9300/Custom.

HIGH VOLTAGE — 32 kV.

POWER CONSUMPTION — 600 Watts max. AC POWER CORD — 3 meters.

WEIGHT — 43.13 kg / 95 lbs.

ENVIRONMENT — Operating Temperature: 0 to 40º C (degrees);

Humidity: 0 to 90 percent non-condensing;

Storage: 10 to 50º C (degrees)

SAFETY AND REGULATION —

UL: Complies with UL 1950.

CSA: Complies with CSA C22.2 No. 950.

FCC: Complies with FCC Class B Regulations.

European: CE Mark. Complies with IEC 950.

DHHS: Complies with X-Ray Emission Regulations.

NOM: Complies with Mexico Standards.

MECHANICAL DIMENSIONS — 12.90 inches (H), 25.75 inches (W), 33.28 inches (D).

REMOTE CONTROL SYSTEM — Two IR receivers for front and rear remote access. Installer’s remote provides full control of menus and convergence. Operators remote is a Universal multi-brand remote control.

Formats Supported

NTSC

3.58

NTSC

4.43

PAL

M, N, B, G.

VGA

IBM Standard

Mac II

640 x 480, 35kHz

Grand

HDTV Formats. 1280 x 720, progressive,

Alliance

16 x 9 aspect ratio. 1920 x 1080, interlaced, 16 x 9

 

aspect ratio, per SMPTE specification, tri-level sync.

3276-A

P A G E 5

Image 5
Contents HD Projection Display Safety Warnings Contents Installer’s Experience Level Installation OverviewNational Power Cord Requirements U.S. / Canada Other CountriesPRO895X SpecificationsStandard Connections Connecting Computer Video SourcesConnecting Video and S-VIDEO Sources Connector PIN Wiring Reference Selecting the Input Source Connections / Control PanelRemote Control MBR3470T Remote ControlBattery Installation Choosing the Setup FunctionProduct Overview Mode Name Freq Signal TypeCabinet Removal Return To Normal ViewingRear View TOP / Inside View Setup Remote Control Setup Mode Notes and Cautions Sync Inputs Specifications for RGB Sync InputsG E 1 Courtesy of Draper Shade & Screen Screen Size SelectionProcedure Overview Setup and Alignment ProcedureSetup References Screen Projection Display Peerless Width Distance Center Physical SetupExamples of Display Setup Distances and Center Points Yoke Ring Magnet and Astigmatator Alignment System AlignmentYoke Tilt Alignment Ceiling/Front Projection Lens Angle Focus Alignment Astigmatator Alignment ProcedureRough Geometry/Convergence of Red and Blue Rough Geometry/Convergence Setup of GreenGeometry/Convergence of Other Aspect Ratios IV. Final Detailed Geometry/Convergence SetupRemote Digital Display Setup Procedure Geometry ConvergenceGoal Remote Adjustment Key G E 2 LI-LIN LI LIN 206-3700