Required Hardware and Equipment | www.ti.com |
4Required Hardware and Equipment
The required hardware and equipment are as follows:
•
•Video sources (security camera, pattern generator, DVD player, etc.)
•Display monitor that supports
–1080i component YPbPr video (50 and 60 Hz)
–480i and 576i component YPbPr video
•Audio amplifier/speakers or headphones
•TVP5158EVM (provided)
–Cables to provide up to four composite video and up to four audio line inputs
–Component Video (YPbPr) cable for output
–USB cable (provided)
–Universal
•DaVinci HD EVM
–Two Samtec HQCD cables
–Component video (YPbPr) cable for output
–
–Universal
5Hardware Setup
The following sections describe the hardware setup for evaluation of the TVP5158.
5.1Setup for TVP5158EVM Stand-Alone Configuration
For evaluation of video quality, comb filter, noise reduction,
576i format to a video monitor. To setup the
1.Analog video sources to TVP5158EVM composite video inputs (see Figure 3)
2.Analog audio sources to TVP5158EVM audio line inputs (see Figure 3)
3.Analog component YPbPr video out from TVP5158EVM to video monitor
4.Stereo audio headphone output from TVP5158EVM to audio amplifier/speakers or headphones
5.USB cable from PC to TVP5158EVM. A green LED should be lit indicating that the EVM is ready for communication on the USB.
6.
10 | TVP5158 Evaluation Module | SLEU108 |
|
| Submit Documentation Feedback |
Copyright © 2009, Texas Instruments Incorporated