www.ti.com |
|
| Hardware Setup | ||
|
| Audio Inputs |
| Video Inputs | |
|
|
|
|
|
|
| CH2 | CH4 | CH2 | CH4 |
CH1 | CH3 | CH1 | CH3 |
Figure 3. Location of TVP5158EVM Video/Audio Inputs
Table 2. Jumper Settings for Stand-Alone Configuration
Jumper | Function | Setting | Comment | |
Designator | ||||
|
|
| ||
|
|
|
| |
W2, W1, W0 | TVP5158 I2C address | Slave address 0xB0 (1011 LLL0) | ||
selection | ||||
|
|
| ||
|
|
|
| |
W3, W4 | I2C master selection | PC USB port controls TVP5158 I2C | ||
|
|
|
| |
W7, W8 | I2C connection to audio DAC | ON, ON | Connected | |
|
|
|
| |
W9 | I2S selection to audio DAC | Monitor record I2S output or mixer I2S output from TVP5158 | ||
|
|
|
|
5.2Setup for TVP5158EVM with DaVinci HD EVM
The TMS320DM6467 DVEVM (digital video evaluation module) can be used as the audio/video
This configuration allows evaluation of all
Sample video and audio driver code and a demo application are provided to run on the TMS320DM6467 on the Linux O/S.
To setup the TVP5158EVM with DaVinci HD EVM configuration, make the following connections:
1.Analog video sources to TVP5158EVM composite video inputs (see Figure 3)
2.Analog audio sources to TVP5158EVM audio line inputs (see Figure 3)
3.Analog component YPbPr video out from DaVinci HD EVM to monitor
4.USB cable from PC to TVP5158EVM. A green LED should be lit indicating that the EVM is ready for communication on the USB.
NOTE: If the VCC GUI Software for TVP5158 is not used, it is not necessary to connect the
TVP5158EVM to a PC USB port.
5.
6.
7.
8.Ethernet cable from LAN to DaVinci HD EVM
SLEU108 | TVP5158 Evaluation Module | 11 |
Submit Documentation Feedback |
|
|
Copyright © 2009, Texas Instruments Incorporated