Operating your programmed remote controller
After performing the procedure given above, the following modes become enabled for use.
DVD MODE (DVD Player Mode)
Buttons with programmed usage and operations are the same as the operational buttons on page 57.
ON
SAT MODE 
ENTER,
CH
STDBY
VOL 
MENU 
MUTING
SAT MODE (Satellite Tuner Mode)
1.Press the SAT MODE button.
The SAT button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed into them.
ON: Turns on and off the satellite tuner unit (same as STDBY button on the remote controller)
CH 
: Moves up and down the preset channel numbers 
: Moves the cursor
ENTER: Confirms the selection
MENU: Displays the menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL 
: Adjusts the volume at the
MUTING: Activates the muting function at the
Numeric keys
ENTER
ON
CABLE MODE 
CH
STDBY
VOL 
MUTING
CABLE MODE (Cable Mode)
1.Press the CABLE MODE button.
The CABLE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed into them.
ON: Turns on and off the cable TV unit (same as STDBY button on the remote controller)
CH 
: Moves up and down the preset channel numbers
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL 
: Adjusts the volume at the
MUTING: Activates the muting function at the
Numeric keys
ENTER
61