Texas Instruments MSP430 manual Evaluation BOARD/KIT Important Notice

Page 2

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:.

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end−product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design−, marketing−, and/or manufacturing−related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein.

Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling the product. This notice contains important safety information about temperatures and voltages. For additional information on TI’s environmental and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or combination in which such TI products or services might be or are used.

FCC WARNING

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end−product fit for general consumer use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be required to correct this interference.

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265

Image 2
Contents User’s Guide Evaluation BOARD/KIT Important Notice EVM Warnings and Restrictions Page Read This First About This ManualFCC Warning Contents Figures TablesInstallation and Setup Installing the Software −1. ADT430 Program IconsInstalling the Hardware MSP−PRGS430Page Operation Software/Hardware Layers of the PRGS430 Environment Basic Procedure Programming MSP430 Devices With the GUIDescription of the MSP-PRGS430 GUI −1. MSP430 Function Buttons and DescriptionsOperation2-5 Error Messages −2. Communication Error Box−5. Data Error −2. Error Messages Content of PRGS430.ini File Use of a Project.ini FileCommand Line Options General DefinitionsExample Return Values/Error Codes in .ini File FN0002/ ReleaseCom PRGS430.DLL-DescriptionFN0001/ InitCom FN0003/ SetDeviceTypeFN0006/ Erase FN0004/ InitTargetFN0005/ ReleaseTarget FN0007/ EraseFile FN0008/ EraseCheckFN00011/ VerifyData FN0009/ EraseCheckFileFN00010/ PatternCheck FN0014/ ProgramData FN00012/ VerifyFileFN00013/ VerifyFileRange FN0015/ ProgramFile PgmwitherasecheckFN0018/ ReadOutData FN0016/ BlowFuseFN0017/ SetVcc FN0020/ Reset FN0019/ ReadOutFileFN0022/ SetNotificationWnd FN0023/ GetDeviceCfgInfoFN0024/ AccessSFR Return Values/Error Codes From PRGS430.DLL Status Return Value CommentPage Hardware Specifications Basic HintsProgramming Adapter Target Connector Signals −1 -Pin Sub-D at Programming Adapter−2. Target Connector Signal Functions MSP-PRGS430 Circuit Diagrams Location of Components − MSP-PRGS430Interconnection of MSP-PRGS430 to OTP/EPROM-Based Interconnection of MSP−PRGS430 to Flash-Based MSP430 Devices Page Hex Object Format Intel-Hex Object Format Figure A−1. Intel-Hex Object FormatTI-TXT File Format Page Schematics Page Schematics B-3 Page Important Notice
Related manuals
Manual 138 pages 30.24 Kb