Texas Instruments MSP430 manual Software/Hardware Layers of the PRGS430 Environment

Page 14

Software/Hardware Layers of the PRGS430 Environment

2.1 Software/Hardware Layers of the PRGS430 Environment

PC − Software

 

GUI

 

PRGS430.EXE

PRGS430.INI

 

CommandLine

Function

 

PRGS430.DLL

DEVICE.CFG

 

[Project] .INI

RS232

 

PRGS430

JTAG

Serial Programming Adapter

MSP430

Target Socket or Application

There are three ways to handle and communicate with the PRGS430 hardware:

-Using the graphical user interface (see Section 2.2)

-Using command line parameters (see Section 2.3)

-Using the PRGS430.dll (see Section 2.4)

Note: this is the fastest way if the PRGS430 should be used in an in-system program and test environment.

2-2

Image 14
Contents User’s Guide Evaluation BOARD/KIT Important Notice EVM Warnings and Restrictions Page Read This First About This ManualFCC Warning Contents Figures TablesInstallation and Setup Installing the Software −1. ADT430 Program IconsInstalling the Hardware MSP−PRGS430Page Operation Software/Hardware Layers of the PRGS430 Environment Basic Procedure Programming MSP430 Devices With the GUIDescription of the MSP-PRGS430 GUI −1. MSP430 Function Buttons and DescriptionsOperation2-5 Error Messages −2. Communication Error Box−5. Data Error −2. Error Messages Content of PRGS430.ini File Use of a Project.ini FileCommand Line Options General DefinitionsExample Return Values/Error Codes in .ini File FN0002/ ReleaseCom PRGS430.DLL-DescriptionFN0001/ InitCom FN0003/ SetDeviceTypeFN0006/ Erase FN0004/ InitTargetFN0005/ ReleaseTarget FN0007/ EraseFile FN0008/ EraseCheckFN00011/ VerifyData FN0009/ EraseCheckFileFN00010/ PatternCheck FN0014/ ProgramData FN00012/ VerifyFileFN00013/ VerifyFileRange FN0015/ ProgramFile PgmwitherasecheckFN0018/ ReadOutData FN0016/ BlowFuseFN0017/ SetVcc FN0020/ Reset FN0019/ ReadOutFileFN0022/ SetNotificationWnd FN0023/ GetDeviceCfgInfoFN0024/ AccessSFR Return Values/Error Codes From PRGS430.DLL Status Return Value CommentPage Hardware Specifications Basic HintsProgramming Adapter Target Connector Signals −1 -Pin Sub-D at Programming Adapter−2. Target Connector Signal Functions MSP-PRGS430 Circuit Diagrams Location of Components − MSP-PRGS430Interconnection of MSP-PRGS430 to OTP/EPROM-Based Interconnection of MSP−PRGS430 to Flash-Based MSP430 Devices Page Hex Object Format Intel-Hex Object Format Figure A−1. Intel-Hex Object FormatTI-TXT File Format Page Schematics Page Schematics B-3 Page Important Notice
Related manuals
Manual 138 pages 30.24 Kb