2.3.2Return Values/Error Codes in .ini File
The error code is returned to the PC operating system and also is stored in PRGS430.ini.
File in the [Options] section:
LastResult=0
0 Ok
2Communication failed!
3Target not connected!
4Adapter not connected!
5Wrong JTAG version!
6PUC failed!
7Synchronization with adapter failed!
8The present adapter is not an MSP−PRGS430!
9Unknown target!
10Wrong target!
11No target selected!
12Target fuse is blown!
13Blow fuse failed!
14Missing setting of VCC!
15Wrong VCC selected!
16Wrong baudrate!
17Communication port error!
18DEVICE.CFG corrupted!
19General error!
20The selected range is invalid!
21Wrong argument!
22Error during file I/O
23File type could not be detected!
24Unexpected end of file!
25PROJECT.INI corrupted!
26Vcc voltage too low for selected function!
27Fuse not release for this device!
101Error at target address (during erase check or verify)
102Unknown command line option
103Command line option out of valid range
104Filename mismatch
105Error in device.cfg